courtney Posted February 5, 2012 Share Posted February 5, 2012 does anyone know much about finding used driveshafts for these cars? will any legacy wagon auto fit mine? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted February 5, 2012 Share Posted February 5, 2012 Driveshaft is two sections. Rear section is the same between manual/automatic but the front section is not. GD Link to comment Share on other sites More sharing options...
courtney Posted February 5, 2012 Author Share Posted February 5, 2012 thanks gd! Link to comment Share on other sites More sharing options...
courtney Posted February 5, 2012 Author Share Posted February 5, 2012 Does anyone know if a 93 auto legacy driveshaft should fit my 99? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted February 5, 2012 Share Posted February 5, 2012 93 will not have the right flange bolt pattern. You will need a 96 to 99 rear section and you may need a 99 specifically for the front section as the auto's chagned in design in '99. I do not know if the '00 and up use the same driveline as the '99 even though the tranny is the same because the body style changed and thus they could be longer. I'm fairly confident that a '96 to '99 rear section will work - just probanbly not the front. A Subaru dealer could tell you for certian what part numbers will interchange, etc. GD Link to comment Share on other sites More sharing options...
courtney Posted February 6, 2012 Author Share Posted February 6, 2012 thanks so much for all this info guys! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now