mcbrat Posted July 8, 2012 Share Posted July 8, 2012 I've seen the same problem when assembling parts from my junk pile the adjuster bracket varied depending on AC version installed, Factory vs. Dealer, etc... you'll just have to find a bracket that will work better... or a spacer Link to comment Share on other sites More sharing options...
TheLoyale Posted July 8, 2012 Author Share Posted July 8, 2012 Thats interesting. Subarus not very consistent eh? :-p Link to comment Share on other sites More sharing options...
1982gl4 Posted July 8, 2012 Share Posted July 8, 2012 I made a spacer for my 82, it worked fine. I also strengthened that bracket, as I found it weak. I added another brace that went back to the intake. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 8, 2012 Author Share Posted July 8, 2012 And it roars to life! I got the Alt all figured out and shiz. Runs pretty good so far. Link to comment Share on other sites More sharing options...
TomRhere Posted July 8, 2012 Share Posted July 8, 2012 :clap::headbang: Link to comment Share on other sites More sharing options...
1982gl4 Posted July 8, 2012 Share Posted July 8, 2012 Good to hear! Link to comment Share on other sites More sharing options...
TheLoyale Posted July 8, 2012 Author Share Posted July 8, 2012 Weberized! Link to comment Share on other sites More sharing options...
TheLoyale Posted July 9, 2012 Author Share Posted July 9, 2012 PCV port works perfect! Has a light suction. Alt with spacer and Stainless Hardware. Dunno if I have this stuff hooked up right? Two are capped off, the 1/4" line on top is running right to a port on the intake, and then on of the tubes connects to the vent line from the tank. Tank hasn't exploded yet, so it must be working? Not bad for $15 a pair. I want to put HIDs for the low beams, and 100w Halogen High-beams! Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted July 9, 2012 Share Posted July 9, 2012 Weberized! Congratulations!!! The Weber Swap Looks Very Well Done, Clean Job! Link to comment Share on other sites More sharing options...
TheLoyale Posted July 9, 2012 Author Share Posted July 9, 2012 Thank you for the comment my friend! Does anyone know where I can buy mandrel bent 90s in a 1-7/8" for my header build? Looks like the parts store only has the ribbed kind. Link to comment Share on other sites More sharing options...
tractor pole Posted July 9, 2012 Share Posted July 9, 2012 Thank you for the comment my friend! Does anyone know where I can buy mandrel bent 90s in a 1-7/8" for my header build? Looks like the parts store only has the ribbed kind. here is a good online source for mandrel bends... I think there is a forum member that works here. Columbia River Mandrel Bending Ben Link to comment Share on other sites More sharing options...
987687 Posted July 9, 2012 Share Posted July 9, 2012 Dunno if you have napa around your area, but they sell mandrel bends. They also sell 2-1 collectors. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 9, 2012 Author Share Posted July 9, 2012 Thanks for the link, that helps! Yeah I have a napa down the road actually, cool. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 10, 2012 Author Share Posted July 10, 2012 Double flared the brake lines which will be leading out of the chassis. I have to make a length which will run down to the trailing arm, then connect to the soft line which runs to the Caliper. This is a High-quality double flaring tool from Eastwood Tools, which I am borrowing from Jboy. Link to comment Share on other sites More sharing options...
TomRhere Posted July 10, 2012 Share Posted July 10, 2012 Impresive oh young Jedi.... Link to comment Share on other sites More sharing options...
heartless Posted July 11, 2012 Share Posted July 11, 2012 This is a High-quality double flaring tool from Eastwood Tools, which I am borrowing from Jboy. OOooooo - me want one! $250 worth of high quality tool! but dang, I bet it is ridiculously easy to use! Link to comment Share on other sites More sharing options...
mcbrat Posted July 11, 2012 Share Posted July 11, 2012 so does your coupler/adapter get you to the 10mm Inverted Flare? Link to comment Share on other sites More sharing options...
TheLoyale Posted July 11, 2012 Author Share Posted July 11, 2012 Are you talking about the union? That just joins both lines together. The line is 3/16" with a 45* seat. The fittings are 3/16"x10mm. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 12, 2012 Author Share Posted July 12, 2012 So I've been in contact with Phil, the guy I bought the car from! He is pretty surprised how far I've taken this car (Dude probably thought he'd never hear about this car ever again after I bought it, let alone see it getting restored) Phil has the original Key box and jack which he is gonna drop off sometime, The key box is really cool! MilesFox has one he found at a junkyard years ago. Phil also said he has another key for the car, maybe its a factory Subaru key and not an SR5! Link to comment Share on other sites More sharing options...
TheLoyale Posted July 12, 2012 Author Share Posted July 12, 2012 This is a cool thread. Vortex, with MX5 fronts and coilovers in the rear! http://www.ausubaru.com/forum/showthread.php?t=20236 Link to comment Share on other sites More sharing options...
Subruise Posted July 12, 2012 Share Posted July 12, 2012 pics of said keybox??? Link to comment Share on other sites More sharing options...
1982gl4 Posted July 12, 2012 Share Posted July 12, 2012 Phil has the original Key box and jack which he is gonna drop off sometime, The key box is really cool! MilesFox has one he found at a junkyard years ago. I actually have one of these, it came out of an ea82 I had that still had the original window sticker and all. The key isn't correct, but I have the key chain to go with it! Link to comment Share on other sites More sharing options...
TheLoyale Posted July 12, 2012 Author Share Posted July 12, 2012 Wow! Yeah, the key that should have been with that would have an LED in it. Big square plastic head. Thats cool though and so is that keychain! Link to comment Share on other sites More sharing options...
TheLoyale Posted July 12, 2012 Author Share Posted July 12, 2012 Alas! I got the insulated female spades today. Choke wire complete. I removed the Charcoal canister, I just need to figure out what to do with the tank vent line, but I have a slight idea. Finished brake lines. Still need the soft line and need to make hardlines for each caliper. A better picture of this $250 helper. Dies Eastwood. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 12, 2012 Author Share Posted July 12, 2012 So just for topic, I keep going back and forth with the idea of going with the Trashwagon paint scheme on this car just because its easy and looks good. I can make it look great as I did the Legacy, I just dunno if I want to spend the time and money of re-shooting it in white and getting the decal remade, I don't know where I'll get the decal made anyhow, or what it will cost. Who will flame me if I were to paint this car like I did the Legacy? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now