1982gl4 Posted July 12, 2012 Share Posted July 12, 2012 I think it would be worth it in the long run to keep it as it is. I like the trashwagon look if it were any other ea81 I would say go for it., but there were, and are so few of these left, it would be nice to see one in really nice condition. Link to comment Share on other sites More sharing options...
heartless Posted July 12, 2012 Share Posted July 12, 2012 I agree with going back to the decals on white. If it were a regular ea81 car, sure, TW it, but this one isnt, it is special & has a history and needs to be returned to that. Pretty much any "sign" shop that does vinyl graphics can cut you new decals, and you have plenty of reference photos to get the layout from, but, it wont exactly be cheap. My suggestion is to print out a couple of your pics, and take them (or email them) to various sign/graphic shops and get a few estimates. sittin here thinking about it - didnt somebody say they "might" have a set of these decals a few pages back? Link to comment Share on other sites More sharing options...
mcbrat Posted July 12, 2012 Share Posted July 12, 2012 Pooparu should be able to replicate them, as he has the nearly complete NOS set I used to have... Link to comment Share on other sites More sharing options...
jboymechanic Posted July 12, 2012 Share Posted July 12, 2012 Keep it as the Ski Team Wagon. Link to comment Share on other sites More sharing options...
Mechanical_misfit Posted July 12, 2012 Share Posted July 12, 2012 I'm on the "keep it a ski team car" team. Link to comment Share on other sites More sharing options...
O.C.D. Posted July 12, 2012 Share Posted July 12, 2012 ski team IMO Link to comment Share on other sites More sharing options...
Subruise Posted July 12, 2012 Share Posted July 12, 2012 i will flame you. ........and i have a LED:headbang: key for my loyale Link to comment Share on other sites More sharing options...
TomRhere Posted July 13, 2012 Share Posted July 13, 2012 Ditto. But it is, "your car", so...................................... Link to comment Share on other sites More sharing options...
TheLoyale Posted July 13, 2012 Author Share Posted July 13, 2012 (edited) Thanks for the feedback ya'll. We'll see what I do when I get that far, Have I let anyone down on the board yet? No matter which direction I take this car, it will be done well, down to the seams. I'm overly anal as you can see, Afterall, anyone who would wait 2 weeks for some rubber insulated spade terminals from Hong Kong because plain terminals wouldn't look as finished, MUST be an anal Mofo :-p Edited July 13, 2012 by TheLoyale Link to comment Share on other sites More sharing options...
tundrabrat Posted July 13, 2012 Share Posted July 13, 2012 Ski Team FTW:headbang: Link to comment Share on other sites More sharing options...
TheLoyale Posted July 14, 2012 Author Share Posted July 14, 2012 Fly wheel resurface? Should I bother, or just toss in a new clutch kit? I don't think its needed? When I did drive it, the clutch felt smooth, and no noise. But the disc is indeed worn, 3/4 way out and than it grabs, no much to play with, plus it was slipping. Resurface; Yes/No? Things to know when/if I go to get it resurfaced? Link to comment Share on other sites More sharing options...
heartless Posted July 14, 2012 Share Posted July 14, 2012 Fly wheel resurface? Should I bother, or just toss in a new clutch kit? I don't think its needed? When I did drive it, the clutch felt smooth, and no noise. But the disc is indeed worn, 3/4 way out and than it grabs, no much to play with, plus it was slipping. Resurface; Yes/No? Things to know when/if I go to get it resurfaced? if it was slipping, then I vote for the resurfacing. slipping clutch will cause glazing - you need to remove the glazing for the new clutch to operate properly. Biggest thing I can think of is spec thickness - if it is the original flywheel it may not have enough left to resurface, and they will tell you that when they check it out. be prepared to track down another flywheel if need be. Link to comment Share on other sites More sharing options...
bratman18 Posted July 14, 2012 Share Posted July 14, 2012 On these older cars, unless the flywheel is loaded with hot spots, I have always just gone over the surface with a sanding disc lightly to kid of refresh the surface. Never had an issue doing that, and it has always worked well. If you were going with an EJ22 swap or something, I'd say get it resurfaced. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 14, 2012 Author Share Posted July 14, 2012 Going over it with a sanding disc is what I had in mind. Was thinking 200grit, too rough? I'm pretty sure I can still get a new flywheel thru a parts house if needed. Link to comment Share on other sites More sharing options...
bratman18 Posted July 14, 2012 Share Posted July 14, 2012 Can't remember what grit I used, but rough is good. It's not like you're going to do too much to the surface, just a little refresh. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 14, 2012 Author Share Posted July 14, 2012 Alright good to know. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 14, 2012 Author Share Posted July 14, 2012 Here is my return spring set up! I also got the Hubcaps from Skylar today! These are gonna be temp until I get some wheels Link to comment Share on other sites More sharing options...
TheLoyale Posted July 15, 2012 Author Share Posted July 15, 2012 Picked up a EA81 Chilton from Matt today, thanks man! Link to comment Share on other sites More sharing options...
jboymechanic Posted July 16, 2012 Share Posted July 16, 2012 I would highly recommend having the flywheel resurfaced properly. In most cases the flywheel has a very specific finish and may even have a very small step (my '96 Legacy required a 0.004 step in the finish). Tom, I know you're the kind of guy that does it once because he did it right. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 16, 2012 Author Share Posted July 16, 2012 Finished bending up the rear lines, and connected to the calipers. Just need the hydraulic hose which leads to the frame. Link to comment Share on other sites More sharing options...
bratman18 Posted July 16, 2012 Share Posted July 16, 2012 I would agree about the flywheel in a Legacy as well, just isn't necessary in an old GL unless your having serious slipping issues. I have done it that way to MANY older cars with no issues ever. But definitely do it whichever way you want, just throwing out what I have experienced. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 16, 2012 Author Share Posted July 16, 2012 I guess by looking at the flywheel, it will determine what step I should take next. I would say the EA81 GL chassis is a pretty Madmax vehicle if you would, These require very little to keep going forever, even under extremes. Wonder if I can convert it to pig sh*t? :-p Link to comment Share on other sites More sharing options...
987687 Posted July 16, 2012 Share Posted July 16, 2012 Mine wasn't chattering or slipping very bad when I changed the clutch. There were no hot spots or discoloration on the flywheel. So I just sanded it with 40 grit until the whole surface was shiny and scuffed up pretty well. Even if my flywheel was cracked and in horrible shape, it was an emergency, and had to go back together... But it was fine, and it's still working perfectly. One of the smoothest clutches I've driven. And it was just a napa cheapo, too. Link to comment Share on other sites More sharing options...
bratman18 Posted July 16, 2012 Share Posted July 16, 2012 Mine wasn't chattering or slipping very bad when I changed the clutch. There were no hot spots or discoloration on the flywheel. So I just sanded it with 40 grit until the whole surface was shiny and scuffed up pretty well. Even if my flywheel was cracked and in horrible shape, it was an emergency, and had to go back together... But it was fine, and it's still working perfectly. One of the smoothest clutches I've driven. And it was just a napa cheapo, too. And do you remember who gave you the advise to rough it up with sandpaper? Link to comment Share on other sites More sharing options...
TheLoyale Posted July 17, 2012 Author Share Posted July 17, 2012 Looking at running one thin cooling fan like this. Perhaps I would run two, I'm just not sure if I can run both fans off the same circuit. Thinking of a 10" fan (Dunno what size are pictured) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now