Mechanical_misfit Posted November 20, 2012 Share Posted November 20, 2012 I'm actually very interested in this. I'll have to send you a PM tomorrow. I have to be up for work at 2:30am. Link to comment Share on other sites More sharing options...
TomRhere Posted November 20, 2012 Share Posted November 20, 2012 One must do what one needs to do. I have had a few to many vehicles myself over the years. Always like having a back-up vehicle around. But 4-5 is just a tad to many and I've been there. Been a tough decision on which one to sell at times. Link to comment Share on other sites More sharing options...
MilesFox Posted November 20, 2012 Share Posted November 20, 2012 Would you trade back the trashwagon for it? just an idea. If i had the cash i would consider the ea81. Schmaus is looking for a car so i can point him your way. Link to comment Share on other sites More sharing options...
TheLoyale Posted November 20, 2012 Author Share Posted November 20, 2012 I would possibly trade, given that Trashwagon is still in the condition it was (Nothing major) I was trying to get my fleet down to two vehicles, but the Loyale is going in the garage soon, so I'd only have the Toyota then. Matt on here sent me a email which I didn't get, but he sounds interested. So I will keep ya'll informed of whats going on. Link to comment Share on other sites More sharing options...
AdventureSubaru Posted November 20, 2012 Share Posted November 20, 2012 I'll send a pm. probably more reliable than g-mail. Link to comment Share on other sites More sharing options...
TheLoyale Posted November 20, 2012 Author Share Posted November 20, 2012 Yeah I just got on, and didn't see an email. For some reason, Yahoo doesn't like Gmail. Jon has the same issue. Link to comment Share on other sites More sharing options...
TheLoyale Posted November 20, 2012 Author Share Posted November 20, 2012 (edited) Sold Matt, now you'll have to keep this thread going with updates :-p Edited November 20, 2012 by TheLoyale Link to comment Share on other sites More sharing options...
AdventureSubaru Posted November 20, 2012 Share Posted November 20, 2012 For sure. Will do. This should be a great Christmas season if I'm combining a new welder and a new Subaru. Should work together nicely. Hopefully the wife falls in love with this car more than she did my toyota. (I get the stink eye when I mention that truck.):-p Link to comment Share on other sites More sharing options...
Mechanical_misfit Posted November 20, 2012 Share Posted November 20, 2012 Awesome to hear is going to a good home! Link to comment Share on other sites More sharing options...
jboymechanic Posted November 21, 2012 Share Posted November 21, 2012 Has the car actually changed hands? That was out of the blue and really fast. Matt's new wife must be pretty cool. Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted November 21, 2012 Share Posted November 21, 2012 Sold Matt, now you'll have to keep this thread going with updates :-p This car is gonna go to a good home, I know... and I Agree that Matt should continue with the Updates! Kind Regards. Link to comment Share on other sites More sharing options...
TheLoyale Posted November 21, 2012 Author Share Posted November 21, 2012 Naw, the car is still parked in front of my house. Its still mine at the moment, but I was given money to hold it. I also adjusted the choke today, tomorrow I will start it and see if it stays running after the first crank (Damn Weber is touchy) :-p Link to comment Share on other sites More sharing options...
MilesFox Posted November 21, 2012 Share Posted November 21, 2012 Liz expressed interest and has the $$$$ if the deal falls out. But Congratulations!. I have been eying up the landlord's impreza. Maybe in the future i could just give you the trashwagon back if i had too many cars. Good luck Matt with the ski wagon. Link to comment Share on other sites More sharing options...
TheLoyale Posted November 21, 2012 Author Share Posted November 21, 2012 I actually wouldn't mind getting back onto the Trashwagon. I still would like to have two vehicles to drive for winter since the EA82 is gonna get put away soon. I could toss you a few bones for TW10 if you don't really need it at the moment. Keep me up to date about that yo! Link to comment Share on other sites More sharing options...
TheLoyale Posted December 17, 2012 Author Share Posted December 17, 2012 Driving the GL for one last time tonight, and was driving fine all night, typical syncro grind going into 3rd once and a while. But other than that, normal. But I came to a complete stop while still in 4th (My mistake) I almost couldn't get it out of forth, but I managed to pop it into 3rd, or what seems to be 3rd. The RPMs reflect 3 gear, but the shifter doesn't feel right...? And I can not move it into any other gear, I tried popping it into another gear while moving and stopped, and I can NOT get it to do anything. I had to slip the SH*t out of the clutch from a dead stop just to get up to speed again so I could make it to a parking lot. I pulled it home with another vehicle, but now what do I do? What would cause this? I've had this issue in the past, but I was always able to get it into another gear, This time, eh, not so lucky. I am running Synthetic gear oil in it (Lucus) but this should not be the issue. Ideas anyone? Link to comment Share on other sites More sharing options...
TomRhere Posted December 17, 2012 Share Posted December 17, 2012 Had that happen with the '86 & '85 BRATs. Took some time playing around with the shifter, but I managed to get things working again. With both, I chalked it up to sloppy shifter, and set about reducing the amount of slop. You may be able to get under it and work the selector on the trans back to neutral. Can't say for sure though. I can't see it being a problem inside of the trans, (just going from my experiences), as they both worked fine afterwards. Link to comment Share on other sites More sharing options...
TheLoyale Posted December 18, 2012 Author Share Posted December 18, 2012 Shifter bushings are firm, but right now, the shifter has slop in it? But its in 3rd, but stick doesn't look quite right. I can't for the life of me get it to do ANYTHING, I've been using a lot of movement and force and nothing happens. If I remove the center console, can I get to anything on top of the tranny? I forgot what it looks like. What options do I have to fix this so I can sell it? Link to comment Share on other sites More sharing options...
mcbrat Posted December 18, 2012 Share Posted December 18, 2012 when you moved it to 3rd, did you just force it while stopped, or try to do it with the engine off? it your clutch wasnt fully adjusted right, this could still happen. if forcing it, the shifter fork could have bent... at this point, I'd pull the engine back out and make sure the clutch and TO bearing arm are okay and not bent. Link to comment Share on other sites More sharing options...
mcbrat Posted December 18, 2012 Share Posted December 18, 2012 do this first... http://www.indysworld.com/80s/general/USRM/mick-usrm/ea81-shifter-fix/EA81ShifterFix.html Link to comment Share on other sites More sharing options...
AdventureSubaru Posted December 18, 2012 Share Posted December 18, 2012 do this first... http://www.indysworld.com/80s/general/USRM/mick-usrm/ea81-shifter-fix/EA81ShifterFix.html X2. Can't hurt. And it takes a lot of slop out of these trannies. My old 83 wouldn't even go into reverse anymore till I did that to it. Made a world of difference. Link to comment Share on other sites More sharing options...
TomRhere Posted December 19, 2012 Share Posted December 19, 2012 I can attest to improved shifer performance from that mod, GD has taken it one better by tapping threads into it. Basically "locking" everything together. I really wish I could recall exactly what I did to get the shifter/trans back into sinc with each other. Just know I played around with it for quite some time. Thankfully, I was in my driveway at the time. Link to comment Share on other sites More sharing options...
AdventureSubaru Posted December 22, 2012 Share Posted December 22, 2012 (edited) Work on both ends it seems. This car and this thread seem like a "passing of the torch" I'll try and keep this thread updated in a similar manner as Tom has done such a great job in documenting this car's progress. So as Tom finds out how to get the trans out of third, I've been getting started on preparations for when this car resides in my driveway. As winter storm Draco descended on the upper midwest yesterday, my brother and I found some time between some deep dish pizza and a Christmas party to go pick up these. Set of 8 spoke Toyota Land Cruiser 6 lug steels. These came from a restoration project of a very nice looking FJ40. They are 15x7 and I think they match the 80s Subaru era pretty well. The plan is to re-drill the steels and stick with the 4 lug application. (Seems far simpler than converting the hubs to a 6 lug.) These steels are in excellent condition. I'll have to get some better pics after they see a nice bath. Thinking this car will see some lift in the not too distant future. That and these 15 inch steels should have the car ready for some tires in the neighborhood of 215/225/235 75 tires. Got more reading to do on the lifts, but the EA81s look great with them and the lifestyle of my vehicles is usually one that included some trail time. Edited December 22, 2012 by AdventureSubaru Link to comment Share on other sites More sharing options...
TheLoyale Posted January 1, 2013 Author Share Posted January 1, 2013 So I looked at the transmission today, I see a cylindrical shaped shaft that slides in and out of the trans (This is connected to the stick shift) What is this? And why is it wet looking? Is this normal. I am guessing it needs lube to slide in and out, just wondering if this IS correct. I tried tapping on it and it jiggles, but nothing else. I look at the rest of the shift linkage and everything looks ok. I still can't get the trans out of 3rd. Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted January 1, 2013 Share Posted January 1, 2013 ... I look at the rest of the shift linkage and everything looks ok. I still can't get the trans out of 3rd. If the Shifter linkage is alright, Sounds like you'll need to take out the Transmission from the Car, it could have internal damage, misplaced / worn Synchros maybe. Link to comment Share on other sites More sharing options...
AdventureSubaru Posted January 2, 2013 Share Posted January 2, 2013 I'd be surprised if internals were the cause. Manual trannys normally give you a good warning before just locking up like that. If all's well on the outside of the trans, I'd be looking for a bent clutch fork next. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now