ontherun987 Posted February 22, 2012 Share Posted February 22, 2012 I just changed the plugs and wire. I rebuilt the carb just a few days before. Now my 1987 gl is hesitating when I take off or rev it, not real bad but just long enough to tell. My old plugs were gapped at .050, I gapped the new one to .040( like the Haynes book said). Not sure if that matters. I don't know where to start on this, I am not sure if its the carb out of tune or the new plug/wires. Link to comment Share on other sites More sharing options...
Dj7291993 Posted February 22, 2012 Share Posted February 22, 2012 I'm sure you already did, but double check all of your vacuum lines. I know I've missed one or two on multiple occasions. Also, make sure they're not split. Also, did you make sure the accelerator pump was working? Link to comment Share on other sites More sharing options...
ontherun987 Posted February 22, 2012 Author Share Posted February 22, 2012 (edited) I took this pic before taking everything a part, I can't seem to find the a home for the red one, I think that is goes to the air box but I can't find any blank hose spots. Edited February 22, 2012 by ontherun987 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now