thecarguy Posted May 15, 2012 Share Posted May 15, 2012 cool Link to comment Share on other sites More sharing options...
PoorManzImpreza Posted May 16, 2012 Share Posted May 16, 2012 (edited) :slobber::slobber::slobber::slobber::slobber:.... This is my dream project.. absolutly AMAZING...just AMAZING.... I have the same brakes on my 89 wagon, you'll love them! I look forward to seeing this in action. Kaz Edited May 16, 2012 by PoorManzImpreza Link to comment Share on other sites More sharing options...
Nico Posted May 18, 2012 Author Share Posted May 18, 2012 (edited) So I went and picked up a Jdm spec c version 8 (maybe type RA) motor swap Ej207DW7ER TY856WB6JA for heads and tranny diff and what ever else I need to twist my leone in to pretzel lol Also I was driving to see the boys at Nvauto and I seen a gc impreza on top of another car scrap yard ! so I found the rims I wanted for a steal 250. So I sent them out to the sand blasters to get ready for the powder coating. I'm thinking world rally blue color for the rims Edited May 19, 2012 by Nico Link to comment Share on other sites More sharing options...
Nico Posted May 18, 2012 Author Share Posted May 18, 2012 cool Thanks ! :slobber::slobber::slobber::slobber::slobber:....This is my dream project.. absolutly AMAZING...just AMAZING.... I have the same brakes on my 89 wagon, you'll love them! I look forward to seeing this in action. Kaz Lol ya should be crazy when all done, I hope the brakes do the job in stoping this car Link to comment Share on other sites More sharing options...
Nico Posted May 18, 2012 Author Share Posted May 18, 2012 welcome home STi version 8 spec c lol Link to comment Share on other sites More sharing options...
Nico Posted May 20, 2012 Author Share Posted May 20, 2012 started stripping for what i need Link to comment Share on other sites More sharing options...
WoodsWagon Posted May 20, 2012 Share Posted May 20, 2012 I don't know where I can put a intercooler in this car I fit one from a Saab 9000 in the front of my GL-10 wagon. Inlet and outlet go under the lower radiator support, may be a clearance issue for you once lowered. I deleted the AC condenser, the hood latch, and put holes through the 86 front bumper behind the license plate to let some airflow through. I also had to trim the inside of the grill a bit so it wouldn't rub. I'd take pictures, but I'm 2,500 miles away from the car. If I can fit that in, you can fit a normal size one in. It was this intercooler: 16" tall x 25" wide, more at the inlet and outlet. Link to comment Share on other sites More sharing options...
Nico Posted May 20, 2012 Author Share Posted May 20, 2012 I fit one from a Saab 9000 in the front of my GL-10 wagon. Inlet and outlet go under the lower radiator support, may be a clearance issue for you once lowered. I deleted the AC condenser, the hood latch, and put holes through the 86 front bumper behind the license plate to let some airflow through. I also had to trim the inside of the grill a bit so it wouldn't rub. I'd take pictures, but I'm 2,500 miles away from the car. If I can fit that in, you can fit a normal size one in. It was this intercooler: 16" tall x 25" wide, more at the inlet and outlet. omg i have one of those intercoolers from along time ago, also i kind of want to keep AC in my car, i was going to make custom lines. i think im just going to mount it right under the front bumper on a angle nice thick one. its all most time i order one up so will see what i come up with SUBARU TECNICO INTERNATIONAL EJ22T built bottom end, JDM EJ207 STi Version 8 Type RA heads all oem ! one of the rarest parts to find and i found both of them some how lol... JDM oil coolers with t stat built in factory nothing can beat these and they are for sale Link to comment Share on other sites More sharing options...
Nico Posted May 21, 2012 Author Share Posted May 21, 2012 SUBARU TECNICO INTERNATIONAL EJ22T built bottom end, JDM EJ207 STi Version 8 Type RA heads all oem test fit my full race twin scroll kit Link to comment Share on other sites More sharing options...
wentz912 Posted May 21, 2012 Share Posted May 21, 2012 Hurry up and get it in the car already! :banana: Link to comment Share on other sites More sharing options...
Nico Posted May 21, 2012 Author Share Posted May 21, 2012 Hurry up and get it in the car already! :banana: LOL i know soon it will be in haha ! im only one man band over here .. still on the way is the clutch coil overs and my new vi-pec and wiring harness. rims are getting powder coated then tires to come in im all most ready to strip it down Link to comment Share on other sites More sharing options...
wentz912 Posted May 21, 2012 Share Posted May 21, 2012 what's your plan for the coilovers? Custom mounts for the rear and GC8 Pillowball/camber adjustment plate deals for the front? Link to comment Share on other sites More sharing options...
Nico Posted May 21, 2012 Author Share Posted May 21, 2012 HSD coil overs gc8 up front, rear from what I see like suberdave has done legacy or new age impreza which is the same for the rear I have them on order so they will be in soon. Link to comment Share on other sites More sharing options...
wentz912 Posted May 21, 2012 Share Posted May 21, 2012 New age imprezas use a post type mount instead of a three bolt/pillow ball type mount like the fronts use? Link to comment Share on other sites More sharing options...
Nico Posted May 22, 2012 Author Share Posted May 22, 2012 Ya I seen that part, I'll drill new holes or drill them in the plates will see once I get there. Also need to make a brace plates and weld a bar to fire wall also for extra strength. Also making a H brace like the impreza have Link to comment Share on other sites More sharing options...
wentz912 Posted May 22, 2012 Share Posted May 22, 2012 That was a question actually. Oh well, you're talented enough you will get something to work. Make sure to post lots of pictures! Link to comment Share on other sites More sharing options...
Nico Posted May 22, 2012 Author Share Posted May 22, 2012 That was a question actually. Oh well, you're talented enough you will get something to work. Make sure to post lots of pictures! Sorry if I misunderstood the question thanks for the complement also ! Yes I will take lots of pics for sure of everything I'm doing Link to comment Share on other sites More sharing options...
goblewagon Posted May 22, 2012 Share Posted May 22, 2012 killer shop thats a sweet lift! Link to comment Share on other sites More sharing options...
Nico Posted May 22, 2012 Author Share Posted May 22, 2012 killer shop thats a sweet lift! Thanks man, it comes in handy That's for sure Link to comment Share on other sites More sharing options...
86 Wonder Wedge Posted May 22, 2012 Share Posted May 22, 2012 You, sir, have great taste in motors AND cars! (I love the P1800 but especially the TR6!) And this is the blueprint for my swap in a 91 Loyale (albeit, without the turbos ) Keep up the good work! Link to comment Share on other sites More sharing options...
Nico Posted May 25, 2012 Author Share Posted May 25, 2012 You, sir, have great taste in motors AND cars! (I love the P1800 but especially the TR6!) And this is the blueprint for my swap in a 91 Loyale (albeit, without the turbos ) Keep up the good work! no those are not my cars lol both those car are a friend of my father that need fixing, and thanks glad you like what i'm doing ! cant wait to visit your page on your build finished wrapping my headers and turbo and got my PURPLE KUSH rims back from the powder coaters, two more sets to do with other crazy colours Link to comment Share on other sites More sharing options...
tractor pole Posted May 26, 2012 Share Posted May 26, 2012 no those are not my cars lol both those car are a friend of my father that need fixing, and thanks glad you like what i'm doing ! cant wait to visit your page on your build finished wrapping my headers and turbo ]and got my PURPLE KUSH rims back from the powder coaters, two more sets to do with other crazy colours exhaust looks good! TWO MORE SETS?!?! no wonder I can't find any of those wheels... that color looks good though:drunk: Link to comment Share on other sites More sharing options...
Nico Posted May 30, 2012 Author Share Posted May 30, 2012 ^^ LOL i might get the five spoke subaru ones, my buddy has a set of six spoke might get them also. also so i just got this hood in what should i put on it ? what type of vents ? side ones or scoop it or cut it and make vents up the middle some thing like this and a scoop ? also got the sti key to work, i went to home depot cut the key and it worked perfect Link to comment Share on other sites More sharing options...
Nico Posted June 1, 2012 Author Share Posted June 1, 2012 Exedy twin plate HD is ready for the power HSD coilovers are here with extra rear mounts Tial BJ VALVE next up is intercooler ????.... oil cooler , oem rad, andddddd i forget ! Link to comment Share on other sites More sharing options...
Myxalplyx Posted June 3, 2012 Share Posted June 3, 2012 Nico, This may be for another thread but do you have any future plans for your XT6? A build of some sort? If not, have you done anything to it yet and if so, what? Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now