Jump to content
Ultimate Subaru Message Board

Retro GL-10 TURBO build


Nico
 Share

Recommended Posts

these are my new fuel and oil pressure sensors KAsensors and from just installing the oil pressure wow highly accurate

 

like to thank Franz @ Dieboldautosport for hooking me up with these bad boys !

 

19809117032_719cec1f01_b.jpg

  • Like 4
Link to comment
Share on other sites

Well I guess I answered my own question, this is my spare one, with OE bushes in it, she's bent to buggery!


B248AD1B-2CBD-4DDD-8B78-436254700383_zpssjgpe4gp.jpg
From an XT so its not like its hooked a boulder or something - definitely needs strengthening!


The 'added after MY series 'Stiffeners'' are a mere cosmetic joke!


CE694C1E-C59F-44CE-BE71-AB4EFBE47EDD_zpsqnt31cme.jpg
2D8AF7B7-2E82-4C26-8B63-75B73DCEE0A8_zps2ev0vzvy.jpg


Gonna have to put some flat bar top and bottom or something, make an I beam out of this thing...

 

And yes, according to part numbers, the XT6 one is different:

 

mustache20bar20part20numbers_zpsu7quxhgf.jpg

 

I wonder whats different? Gauge of the plate?

 

 

  • Like 1
Link to comment
Share on other sites

Notice that they all seem to be bent the same way, probably has something to do with the way diff is mounted & the amount of torque that is applied through it ... ;) 

You might be chasing your tail a bit here though as you strength one bit, may have to compensate / strengthen in other areas as the load is transferred to things like the mounting points on chassis / floor ... :blink:

You can get 'open seam' round tube / pipe, roll / bend it to the required shape and then stitch weld it to top & bottom flanges ... :)

OSCIR-01.jpg
Not sure what size or how thick to get it though ... :(

Try here : http://catalog.johnsonrollforming.com/Asset/openseam_tubing.pdf

Add : Thinking about how the forces act on the bar, you'd want to increase the torsional stiffness at right angle to bar with an extension of your 'T' shaped beam, into a stronger overall triangulation shape - so something like this ( in Plan / Section ) :

 

                  | |                                                                          o ,

o------------[__]------------o                                                         |    o
  ````~~~~~~~~~~~~````                                                          o '  

 

Bit rough, but you get the idea ... B)

 

P.S. : Other option is to just butt weld two together ... :ph34r:


Cheers, Bantum ...

Edited by Bantum
  • Like 1
Link to comment
Share on other sites

  • 1 month later...
  • 5 months later...
I guess I should update this build thread since new parts are being piled up for my Subaru Leone RX TURBO STi, as of now its in storage for winter but was building the Subaru Leone TURBO WRX NB-R Wagon version which can be found here --> http://forums.nasioc.com/forums/showthread.php?t=2687011
 
20883923329_45ca365bae_b.jpg
 
 
 
 
so I just ordered these EJ22T oil jets brand new from the dealership which if I remember right they couldn't be sold at the dealership which is a myth !.. also got the JDM STi quick steering sticker for my Leone.
 
25095941545_17d525bc77_c.jpg
 
 
out of japan I finally found one of these rare STi 6mt Short shifters which was a task and has the serial number right on it from STi factory.
 
24465466244_7aabece2c8_c.jpg
 
24728499579_c412de8ae0_c.jpg
Edited by Nico
  • Like 3
Link to comment
Share on other sites

Do you have the part number for those squirters? I've looked before, and I didn't see them listed in the catalog. But with a part number, they certainly might be available.

 

ill get it for you

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

another cool part from japan R180 STi finned rear diff cover, helps cool the rear diff fluid.
 
25002634201_baf2c680be_c.jpg
  • Like 3
Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...

is that hood scoop from an old ford truck?? like a '55?

 

attachicon.gif11027959_881126035327697_1231056822103892512_o.jpg

 

like this one?

 

a company in the usa makes them out of fiber yours looks to be the same 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

so new season and new SUPER Rare rims for that 90s style square look, these a hard to find even pictures of them !
 
JDM 16x8 5x100 ET35 Tecnomagnesio ..MAGNESIUM.. 
 
26176504161_7f29df6da8_z.jpg
 
 
aluminium caps with snap rings wow ! 
 
25640112623_5f84d8a076_z.jpg
 
 
Made In Italy
 
26150333132_db0e3c4113_z.jpg
 
 
 
 
 
 
 
off to the walnut blasting and ready for the gold paint job ! 
 
26216851926_096849a4be_z.jpg
  • Like 6
Link to comment
Share on other sites

  • 2 months later...
  • 10 months later...

LOL

 

 

well i sold my legacy turbo as is so im just going to buy new stuff like a STi ver 8 for its heads, wires, 6MT, then swap the built ej22t block i built.

 

so parts list is

 

VER 8 Sti complete

Vi-PEC V88

EXEDY ?? dont know yet maybe multi plate to hold the power

SPARCO seats: maybe, kind of want it stock but need support lol

Rims: gc8 and volk jdm if i can find them

Tire's : RACE SLICK lol for evey day haha !!

 

new rotor pads that wont stop this much power to weight lol

7149342649_f537ed0227_b.jpg

 

my rear control arms, that me and my dad had to make a tool becuase no one on the plant has one lol

7003256432_ecc5e14d2a_b.jpg

 

7003258732_cedca78e92_b.jpg

 

7149353071_cde696f3dc_b.jpg

 

little thermal coat so then i can wrap them

7003268406_f7d5587f8f_b.jpg

 

got some tubes to make my wastegate pipes longer away from everything

7003269964_d09a9b5ce3_b.jpg

How did you make the control arms? I am trying to do a 4 lug to 5 lug swap and I can't get any XT6 parts

  • Like 1
Link to comment
Share on other sites

 

I guess I should update this build thread since new parts are being piled up for my Subaru Leone RX TURBO STi, as of now its in storage for winter but was building the Subaru Leone TURBO WRX NB-R Wagon version which can be found here --> http://forums.nasioc.com/forums/showthread.php?t=2687011

 

20883923329_45ca365bae_b.jpg

 

 

or insta gram https://www.instagram.com/big_bad_wolf_xo/

 

 

so I just ordered these EJ22T oil jets brand new from the dealership which if I remember right they couldn't be sold at the dealership which is a myth !.. also got the JDM STi quick steering sticker for my Leone.

 

25095941545_17d525bc77_c.jpg

 

 

out of japan I finally found one of these rare STi 6mt Short shifters which was a task and has the serial number right on it from STi factory.

 

24465466244_7aabece2c8_c.jpg

 

24728499579_c412de8ae0_c.jpg

Where did you order your body kit? Could you assist me with the rear end conversion from 4x140 to 5x100?

  • Like 1
Link to comment
Share on other sites

so been really slacking on updates but lets try and catch up


I add a new turbo the old version died from Anti lag fun lol, new borg warner s300sx-e has better oiling and updated cover

47977050927_23fe65cf37_o.png

47977104166_9346ae5cb7_o.png

Edited by Nico
  • Like 3
Link to comment
Share on other sites

  • 1 month later...
  • 3 weeks later...

I also swapped out the turbo blanket for the PTP Turbo Blanket, so much better design and construction then the DEI ones that fall apart 

47977051462_bb5bfc2a19_o.png

I also swapped the Sparco Grid seat for a MOMO racing seat with higher bolsters to keep me snug while I'm on the track, the sparco grid is in my wagon version.

47977168861_3df6142559_o.png

47977116972_ff0becbec8_o.png

 

Edited by Nico
  • Like 1
Link to comment
Share on other sites

i add DBA 2 piece rotors for better stopping on the track, the stoptec ones cracked 

47977050787_1fc957dcc1_o.png


I also add Forged Billet shifter forks, i was sick of the plastic tab suabru used for the stock STi 6MT transmission.

47977104291_6d3d10fd40_o.png

47977055638_200bf857f4_o.png

 

Edited by Nico
  • Like 3
Link to comment
Share on other sites

this is a short clip with all the new toys add. 

https://www.instagram.com/p/BNVOHVkBY3a/

also add a FIA Rain light so people stay off my rump roast i hope lol.

https://www.instagram.com/p/BVvJYRPjDK7/


also got a super rare Nardi Torino Gara Sport 350mm flat bottom steering wheel from japan.

47977121098_167e54281c_o.png

today i just got back my was silver Tecnomagnesio rims that have been properly striped and painted to the original Subaru 80's single stage paint my car came with 


47977116732_d65a8eec38_o.png

 

Edited by Nico
  • Like 4
Link to comment
Share on other sites

so one of two boxes from Europe just came in and wow i'm super pumped !! rare euro spec OEM Subaru parts !.. still going through the stuff but just put on these Ver1 Euro spec corner lights that pop out more then the JDM Ver

47977120903_694c0a93a3_o.png

47977120653_74e4c9ec44_o.png

47977169051_0735ff67be_o.png

 

 

 

 

 

Edited by Nico
  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
On 7/21/2017 at 7:02 PM, iluvdrt said:

So awesome. I am glad you found our group on Facebook as well.

 

yeah i made a car page i didnt know there was that much activity on FB 

 

 

 

 

 

 

 

 

 

 

 

 

more rare parts from japan ! my new PIAA Nakajima Racing wheels 16x8 5x100 ET38 made by RAYS or ENKEI 17lbs..

they have that T37 volk look but five star style to them which should make them pop on my square body once i sand blast and have them painted Subaru gold ! 


47977120273_989e21ba24_o.png


47977168656_a44b2161ca_o.png

 

 

 

 

 

 

 

 

 
Edited by Nico
Link to comment
Share on other sites

  • 1 year later...

I can't remember where I left on but lots of new stuff and building stuff has started

here is the gold PIAA wheels 16x8 5x100 ET37

47977326546_d853b873f9_o.png


also decided to construct my own shifter setup because Subaru won't sell me there version 


47977324736_c41cde4494_o.png


47977272862_c2f193305a_o.png


47977275678_8cd1484ffc_o.png


47977274652_38e435a8b1_o.png


47977277108_984f9fb24e_o.png


47977275022_ecbe904778_o.png

short video of the day & night shifter feel 

https://www.instagram.com/p/Bju3YLXn3op/?utm_source=ig_web_copy_link

Link to comment
Share on other sites

My 1992 Subaru Loyale has seen better days the Canadian winters has eaten the body away so ill be stripping it down and using what I need to build my 1988

 

 

20883923329_45ca365bae_b.jpg

 

 

 

21485480572_366a9b9596_b.jpg

 

 

NVAUTO wiring harness built from the JDM wiring for my car.. AVSC JDM NBR WRX open source OBD2 ECU... stock on stock on stock !!

 

22937231732_6ff4d348d4_k.jpg

 

 

NVauto JDM WRX NB-R V7 V8 V9 STi wiring harness all complete ready to be added in the mighty LEONE SUPER Wagon !

 

22891810669_b84404b089_b.jpg

 

 

so here is my new ECU in place and super clean job from my buddy Nam at NVauto

23232991443_7c72df9e27_c.jpg

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...