dankindler Posted March 4, 2012 Share Posted March 4, 2012 Hello as the the title states i need a new engine. Its for my 1999 legacy gt 2.5l . Can anyone recomend a reputable engine or parts dealer i can buy an engine from that will have a warranty and be comp tested, etc. thanks alot Link to comment Share on other sites More sharing options...
ccrinc Posted March 4, 2012 Share Posted March 4, 2012 Palm Harbor, as in Palm Harbor, FL? I grew up in St. Pete, just south of you! Link to comment Share on other sites More sharing options...
ThosL Posted March 4, 2012 Share Posted March 4, 2012 I'd consider a 2.2 engine replacement. The one that a garage put in mine he installed for around $1500 including the engine. It had around 75K on it and was in great shape. Link to comment Share on other sites More sharing options...
3Pin Posted March 4, 2012 Share Posted March 4, 2012 1995 Engine Subaru LegacyRUNS GREAT,RS BAD TIMING COVER129,000A69207$450Gardner Auto Parts, Inc. USA-FL(Pompano-Beach) Request_Quote 1-800-321-6399 Request_Insurance_Quote </B>204 How about this one. It was on car-part.com A 95 2.2 will work in your car. Link to comment Share on other sites More sharing options...
WoodsWagon Posted March 4, 2012 Share Posted March 4, 2012 99 has an 8 bolt bellhousing, 95 has a 4 bolt. You will need to do something for the lower starter mount bolt, but other than that it bolts up. Link to comment Share on other sites More sharing options...
987687 Posted March 5, 2012 Share Posted March 5, 2012 I've heard people run the starter with just the top bolt, and it does fine. Link to comment Share on other sites More sharing options...
Fairtax4me Posted March 5, 2012 Share Posted March 5, 2012 99 has an 8 bolt bellhousing, 95 has a 4 bolt. You will need to do something for the lower starter mount bolt, but other than that it bolts up. Like put a bolt in it? Maybe the later ones are different, I pulled an engone out of a 99 that still had the stud and 17mm nut on the trans bell housing for the starter. Link to comment Share on other sites More sharing options...
johnceggleston Posted March 5, 2012 Share Posted March 5, 2012 (edited) Maybe the later ones are different, I pulled an engone out of a 99 that still had the stud and 17mm nut on the trans bell housing for the starter. for the outbacks at least, there are a few early ones in 99MY that use the same trans as the 98 outback, TZ102Z2DBA as opposed to the phase 2 trans, TZ1A2ZJEBA. but i have no idea how many. and i do not know if the legacy was similar. i think there is only one trans listed for the GT. i need a new engine. Its for my 1999 legacy gt 2.5l .it all depends on what you are trying to do, replace existing with used, install new /rebuilt with 3/36 warranty, or swap in an ej22 to keep it on the road. price will vary widely. Edited March 5, 2012 by johnceggleston Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now