sube101 Posted March 17, 2012 Share Posted March 17, 2012 (edited) i am offering ej 2.2 single port UEl headers, they are built to order so no group buys required. i am offering them in two different materials. they are all tig welded (not wire feed/MIG). and i am located in St Helen's Oregon price 304 stainless steel- 330.00+shipping alumanized steel- 250.00+shipping i can ship anywhere in the us using ups. you can pm me or send an email with "uel headers" in the subject line to sube4x4@gmail.com stainless headers and alumanized Edited March 17, 2012 by sube101 Link to comment Share on other sites More sharing options...
Pooparu Posted March 17, 2012 Share Posted March 17, 2012 Link to comment Share on other sites More sharing options...
Sunnyx Posted March 17, 2012 Share Posted March 17, 2012 mine are sitting in syracuse NY ups location but they wont be delivered till monday! =( ill post a video of them as soon as i can get them on! Link to comment Share on other sites More sharing options...
Sunnyx Posted March 20, 2012 Share Posted March 20, 2012 Wasnt able to get them on today seems the bolts to my cat are welded on not sure what to do now Link to comment Share on other sites More sharing options...
sube101 Posted March 20, 2012 Author Share Posted March 20, 2012 if their truely welded then an angle grinder works nicely. other wise a nice cheater bar helps too. Link to comment Share on other sites More sharing options...
Sunnyx Posted March 21, 2012 Share Posted March 21, 2012 i was able to get them on yesterday took 3 hours to do it since i couldn't unbolt just the header had to drop the header and catalytic converter at the same time. one of the spring bolts at the midpipe snapped on me so atm i only have one holding it on for now. Im pretty sure its leaking at the flanges where the header bolts to the engine block im getting new bolts and gaskets that should fix that leak. once i get all the leaks fixed on it ill post a vid of what they sound like. Link to comment Share on other sites More sharing options...
Sunnyx Posted March 24, 2012 Share Posted March 24, 2012 exhaust leaks fixed! its on nice and tightly sealed Link to comment Share on other sites More sharing options...
96LegacyEJ22 Posted March 25, 2012 Share Posted March 25, 2012 Still waiting for mine to get back to Ricks. Sadly I am about to be headerless as I just sold my current one. Link to comment Share on other sites More sharing options...
Sunnyx Posted March 26, 2012 Share Posted March 26, 2012 hey steve you may want to try RS25.com if your looking to sell more of them cause im pretty sure theres alot of people on there that want them. When i posted mine on their forums in "what did you do to your subaru today" quite a few people seemed interested. I may sell the one i have now, and have you remake mine with longer runners like i showed you, im also curious to see how your gonna do the new collectors! Link to comment Share on other sites More sharing options...
sube101 Posted March 26, 2012 Author Share Posted March 26, 2012 I will post up a picture sometime this week of the design change. It won't look too diffent its more for an attempt to reduce warping. And your header will be at ricks on Tuesday ill be finished with it tonight. Link to comment Share on other sites More sharing options...
sube101 Posted March 26, 2012 Author Share Posted March 26, 2012 Also I have tried posting a link with rs25 but it got deleted and I was givin a warning. And they want like 100 bucks a month to be a vendor Link to comment Share on other sites More sharing options...
Sunnyx Posted March 27, 2012 Share Posted March 27, 2012 Im sorry man i disnt know you had to pay to become a vender over there Link to comment Share on other sites More sharing options...
sube101 Posted March 27, 2012 Author Share Posted March 27, 2012 yeah neither did i. ill probably post them on ebay sometime as well. Link to comment Share on other sites More sharing options...
Sunnyx Posted March 27, 2012 Share Posted March 27, 2012 Yea if yu do the ebay thing could still get people from rs25 Link to comment Share on other sites More sharing options...
NorthCoast Posted March 27, 2012 Share Posted March 27, 2012 Video? Anxious to hear what they sound like. Link to comment Share on other sites More sharing options...
Lavid2002 Posted March 27, 2012 Share Posted March 27, 2012 I am looking for a set of STOCK HEADERS! I know a ton of people visiting this page are buying aftermarket headers. I just want a set of stock cheap single port headers for an ej22 swap I am doing. Thanks -Dave Link to comment Share on other sites More sharing options...
NorthCoast Posted March 27, 2012 Share Posted March 27, 2012 EJ22 Stock without the cat would be nice. Link to comment Share on other sites More sharing options...
sube101 Posted March 28, 2012 Author Share Posted March 28, 2012 i dont have a stock header setup yet. probably wont until this summer. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted March 29, 2012 Share Posted March 29, 2012 We do have a solution for stock headers though - clamp-on or weld-on conversion flanges to modify the dual-port headers. Runs about $75 for a set. Sube101 makes these as well. GD Link to comment Share on other sites More sharing options...
Sunnyx Posted March 30, 2012 Share Posted March 30, 2012 We do have a solution for stock headers though - clamp-on or weld-on conversion flanges to modify the dual-port headers. Runs about $75 for a set. Sube101 makes these as well. GD what do you mean clamp/weld on conversion flanges to modify the dual ports to single ports or to do something else just curious=P Link to comment Share on other sites More sharing options...
Sunnyx Posted March 30, 2012 Share Posted March 30, 2012 i'll post my video up from my iphone but warning its loud and my exhaust sounds raspy and crappy because of the horrible weld job cole muffler did on my exhaust:banghead: they welding my mid-pipe to my 06 wrx axel back by sticking a piece of pipe inside one another and welded it on pretty crappy. Link to comment Share on other sites More sharing options...
sube101 Posted March 30, 2012 Author Share Posted March 30, 2012 basically you take a dual port stock header, cut the weld after the collector. slide my adapter on and either use an exhaust clamp or weld it. heres a link to the pictures http://www.ultimatesubaru.org/forum/showthread.php?t=130599&highlight=single+port+header Link to comment Share on other sites More sharing options...
Sunnyx Posted March 30, 2012 Share Posted March 30, 2012 again my exhaust is really crappy Link to comment Share on other sites More sharing options...
Caboobaroo Posted April 5, 2012 Share Posted April 5, 2012 Would you be willing to build something like this for an ER27 in a XT6? Link to comment Share on other sites More sharing options...
sube101 Posted April 5, 2012 Author Share Posted April 5, 2012 it all depends on the demand. How many people would be interested and the overall costs Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now