Axiom614 Posted March 23, 2012 Share Posted March 23, 2012 Im wanting to know if I can convert the single pot calipers, to the 2 pot calipers? I have a 96 Legaback wagon 2.2 any suggestions? Link to comment Share on other sites More sharing options...
Caboobaroo Posted March 23, 2012 Share Posted March 23, 2012 You can do it. You'll need the larger rotors and calipers with brackets and pads. Link to comment Share on other sites More sharing options...
Axiom614 Posted March 24, 2012 Author Share Posted March 24, 2012 so take all the hardware off the 2 pot donor and replace it with my old hardware? and im done? This is my first subie. so far its been a awesome car.. thanks for your input.. Link to comment Share on other sites More sharing options...
bratman18 Posted March 24, 2012 Share Posted March 24, 2012 Yes, take the calipers, brackets, pads, and rotors off the parts car. Unbolt your stuff, and bolt on the new stuff in it's place. Link to comment Share on other sites More sharing options...
Axiom614 Posted March 24, 2012 Author Share Posted March 24, 2012 Thank You.... Be back later.. Link to comment Share on other sites More sharing options...
davebugs Posted March 24, 2012 Share Posted March 24, 2012 They are referred to as "Lego's" for a reason. Lots of stuff interchangable for several years and often mechanicals between Legacy and Impreza. Link to comment Share on other sites More sharing options...
MilesFox Posted March 24, 2012 Share Posted March 24, 2012 I did this to a 94 legacy gt wagon using dual pots from a 2000 legacy outback wagon. I did the rears too, doing the same thing with caliper brackets and backing plates, but using the same parking brake shoes original to the car. The rears are still single pots, but larger rotors. If you can snag all 4 brakes that is a total package. These calipers i used appear to be the same a 90-94 turbo legacy, and wrx 2 pot as well. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted March 24, 2012 Share Posted March 24, 2012 With the larger 2-pot brakes you must use 15" or larger wheels. If you have single pot calipers now then you must have a Legacy L rather than an Outback or GT which would have the 2-pot brakes standard. If you have 14" wheels the larger brakes will not fit inside them. GD Link to comment Share on other sites More sharing options...
MilesFox Posted March 24, 2012 Share Posted March 24, 2012 With the larger 2-pot brakes you must use 15" or larger wheels. If you have single pot calipers now then you must have a Legacy L rather than an Outback or GT which would have the 2-pot brakes standard. If you have 14" wheels the larger brakes will not fit inside them. GD I forgot to mention this. My 94 legacy has 15 inch forester wheels, and i cannot go back to the original 14" snowflakes. make the move to 15 inch wheels with 195/60 15 tires and it will be close to the original 185/70 14 without throwing off the speedo more than a few pwercent. Link to comment Share on other sites More sharing options...
idosubaru Posted March 26, 2012 Share Posted March 26, 2012 have to run 15" wheels (and even then it will depend which calipers you use and which 15" wheels you use - some steel 15" wheels won't clear all dual pot pistons). you can upgrade the back calipers like Miles said without those same concerns, the rears have more clearance than the fronts. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now