xman Posted March 29, 2012 Share Posted March 29, 2012 So I found that the stiffness of my clutch cable is because the retaining clip on the pedal end is missing. Any advice on where to get another or what I can use as a substitute? I was thinking of using a brake line retainer clip but I'm not sure if it is the same size. USMB to the rescue? Link to comment Share on other sites More sharing options...
miazda Posted March 29, 2012 Share Posted March 29, 2012 Is it just a c-clip? ....hardware store Perhaps dealer order? Link to comment Share on other sites More sharing options...
xman Posted March 29, 2012 Author Share Posted March 29, 2012 It's not just a C-clip, since it is missing, I'm not 100% what it looks like, but it does the same function as this clip which is at the gearbox side of the same cable. I'm ASSuming it could look the same since the washers and rubber grommet thingys look the same on both ends of the cable. I borrowed this pic from another thread by Moosens, but it might help. Again it is NOT the clip in the picture, it is on the other end where the cable attaches to the bedal box. Thanks. Link to comment Share on other sites More sharing options...
95legwagon Posted March 30, 2012 Share Posted March 30, 2012 i know my pedals have the same thing.... that flat clip that holds the clutch cable to the pedal box? id try a dealer for sure.... wouldnt be easy to find anywhere else i would guess.... good luck! and if you do find where to get them post it up so others can see too who knows....maybe ill need one someday! Link to comment Share on other sites More sharing options...
desertsubaru Posted March 30, 2012 Share Posted March 30, 2012 It's not just a C-clip, since it is missing, I'm not 100% what it looks like, but it does the same function as this clip which is at the gearbox side of the same cable. I'm ASSuming it could look the same since the washers and rubber grommet thingys look the same on both ends of the cable. I borrowed this pic from another thread by Moosens, but it might help. Again it is NOT the clip in the picture, it is on the other end where the cable attaches to the bedal box. Thanks. Take either a chisel or flathead screw driver up against the bent piece on the left in the photo and hit it with a hammer. Or get a pair of vice grips on it and pull it off. Link to comment Share on other sites More sharing options...
edrach Posted March 30, 2012 Share Posted March 30, 2012 i know my pedals have the same thing.... that flat clip that holds the clutch cable to the pedal box? id try a dealer for sure.... wouldnt be easy to find anywhere else i would guess.... good luck! and if you do find where to get them post it up so others can see too who knows....maybe ill need one someday! This is what pull a part is for....those small pieces that no one carries and that are overpriced at the dealer's. As to removing the clip, I use a small long nosed vise grip and grab the straight tab on the end and tap the vise grip with a small hammer for the difficult ones. Easy ones I do with a long nose pair of pliers. Link to comment Share on other sites More sharing options...
xman Posted March 30, 2012 Author Share Posted March 30, 2012 Thanks for the advice on how to pull it out, I knew that, the notes on the photo are not mine. As for pull a parts, they are not so common here in SoCal and to find an 80's Subaru is even less common. I was hoping there was an alternative or someone would have one I could buy. Dealerships here are not so helpful, their systems don't go back far enough to help me. But I'll keep trying. Link to comment Share on other sites More sharing options...
miazda Posted March 30, 2012 Share Posted March 30, 2012 ^yeah you gotta talk to the one older guy that's been there since who knows when. and have him dig through his book for the old part number, which does work in their system, but they often can't search that system directly. Good news they pretty good about supporting their cars, and being as common as it is likely not discontinued. If you're still having trouble let us know. I'm friends with my subaru parts guy, and can probably track it down. Link to comment Share on other sites More sharing options...
xman Posted March 30, 2012 Author Share Posted March 30, 2012 I got myself a hairpin retainer clip that I will try until I get the real deal. like this: I'll swap the one in the engine bay down to the pedal cause I know that will be more solid under there where I can't see it well to check on it. And I'll put the wire clip in the engine bay where I can more easily reach it and keep an eye on it. Link to comment Share on other sites More sharing options...
edrach Posted March 31, 2012 Share Posted March 31, 2012 I'll try to remember to look for that clip next time I'm at Pick N Pull. If the rains would stop I'll go this weekend. I know they have at least one early wagon there; hopefully it's a manual transmission. Link to comment Share on other sites More sharing options...
Crazyeights Posted March 31, 2012 Share Posted March 31, 2012 Ed, it is a silver 1984 4-speed - but it is going fast! Link to comment Share on other sites More sharing options...
edrach Posted March 31, 2012 Share Posted March 31, 2012 Ed, it is a silver 1984 4-speed - but it is going fast!Thanks. Hopefully the rain lets up enough to pick that up. Not likely someone will go after the clip in question. Link to comment Share on other sites More sharing options...
Moosen Posted March 31, 2012 Share Posted March 31, 2012 That was me not moosen"s" Link to comment Share on other sites More sharing options...
edrach Posted April 1, 2012 Share Posted April 1, 2012 That was me not moosen"s"Now I'm confused; first time you jumped into this thread. Am I missing something here? Link to comment Share on other sites More sharing options...
Moosen Posted April 1, 2012 Share Posted April 1, 2012 Now I'm confused; first time you jumped into this thread. Am I missing something here? there is the member Moosens and then there is the member Moosen (that's me) hahaha Link to comment Share on other sites More sharing options...
Crazyeights Posted April 1, 2012 Share Posted April 1, 2012 Let me know Ed, if you can't make I'll try and grab it for you before the cars gone. Link to comment Share on other sites More sharing options...
edrach Posted April 1, 2012 Share Posted April 1, 2012 there is the member Moosens and then there is the member Moosen (that's me) hahaha I know the difference between you and Paul (moosens). Just was confused about whether you needed that clip also. Link to comment Share on other sites More sharing options...
edrach Posted April 1, 2012 Share Posted April 1, 2012 Let me know Ed, if you can't make I'll try and grab it for you before the cars gone.I was going to grab it and send it off to the OP; but I don't have any dibs on it. Link to comment Share on other sites More sharing options...
moosens Posted April 1, 2012 Share Posted April 1, 2012 Can I add to the confusion? Hey , I've got those clips , probably a bunch of guys do. When I'd part out my cars I'd save all those little clips ,etc. Let me know if you still need one and I'll look in my boxes of doo dads. I think that's pretty much the same size clip at that point from the 70's thru the early Legacy. Anybody else? Link to comment Share on other sites More sharing options...
angelo_251 Posted April 1, 2012 Share Posted April 1, 2012 u can get them at any auto parts store Link to comment Share on other sites More sharing options...
ShawnW Posted April 2, 2012 Share Posted April 2, 2012 Its a C Clip with tabs on the inside edge of the C. Not real hard to find at a junkyard. Link to comment Share on other sites More sharing options...
edrach Posted April 2, 2012 Share Posted April 2, 2012 Well, I didn't make it out this weekend. I don't want to stop anyone else helping out the original poster. Link to comment Share on other sites More sharing options...
xman Posted April 3, 2012 Author Share Posted April 3, 2012 (edited) thanks. the clip I posted above is working fine. I also noticed, while I was installing that clip, that the hill holder cable has a similar clip. Since my hill holder is disabled, I could have just borrowed the clip from that cable and gone on my way. Now I know where I have a spare readily at hand under the hood should I ever need it. Living in SoCal, there are not convenient junkyards around like the rest of the civilized world, and I would have thought it a common item in auto parts stores as well, but every one I went into didn't have it and the parts monkeys couldn't find it in their systems. I'm glad this thread is here now to help others who come across the same issue I had. Edited April 3, 2012 by xman Link to comment Share on other sites More sharing options...
moosens Posted April 4, 2012 Share Posted April 4, 2012 Places like Cali and urban North East , and such , yards are Mob controlled or influenced and most unfriendly to the guys like US. Or so insurance terrorized they're paranoid. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now