swedspeed Posted March 30, 2012 Share Posted March 30, 2012 Hi Iam currently putting a Ea82T engine in a Vw 1302S After putting the the engine and wiring in to the bugg and cranking Ive got the troublecode Crank Angle Sensor (no position pulse after checking I found a fuse missing with the fuse replaced I now get the codes 14 - Fuel Injectors 1 & 2 15 - Fuel Injectors 3 & 4 and 12 the starter switch? where do I go from here?? Link to comment Share on other sites More sharing options...
ivans imports Posted March 30, 2012 Share Posted March 30, 2012 Buy a noid light and check injetor pulse you can buy a noid light set at princess auto for 25 bucks sounds like injector ground to me Link to comment Share on other sites More sharing options...
Cougar Posted April 3, 2012 Share Posted April 3, 2012 Check to see if those areas are getting power from the ignition switch and the injectors are getting power from fusible link 1. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now