johnnywrx Posted April 7, 2012 Share Posted April 7, 2012 Just saying hi forum looks good i have a my94 v1 sti saloon which i have been rebuilding it for the last 8 months all done myself in my garage but now started it its now running p1 suspension dimpled and grooved discs 4-pot calipers front full 3'' de-cat system large tmic 44o injectors cold air feed induction kit polished and ported heads walbro pump z4 ecu with a esl board and a full facelift conversion for 2000 model prodrive oz alloys hope to speak to you soon cheers john Link to comment Share on other sites More sharing options...
95legwagon Posted April 8, 2012 Share Posted April 8, 2012 welcome to the forum sounds like you got a good grasp of soobs! if you need any help with anything just start a thread and im sure one of our many experienced members can point you in the right direction! Have fun -jarrid Link to comment Share on other sites More sharing options...
johnnywrx Posted April 10, 2012 Author Share Posted April 10, 2012 welcome to the forum sounds like you got a good grasp of soobs! if you need any help with anything just start a thread and im sure one of our many experienced members can point you in the right direction! Have fun -jarrid Hi jarrid i learn quickly and i've been modifying different types of cars Ford,Vauxhall and now scoobs but this is my first turbo car had a few nightmares with this one but going to enjoy hopeing for 300+bhp cheers john Link to comment Share on other sites More sharing options...
nipper Posted April 10, 2012 Share Posted April 10, 2012 *waves hello* Link to comment Share on other sites More sharing options...
johnnywrx Posted April 14, 2012 Author Share Posted April 14, 2012 *waves hello* Hello nipper cheers john Link to comment Share on other sites More sharing options...
johnnywrx Posted April 14, 2012 Author Share Posted April 14, 2012 Just saying hi forum looks good i have a my94 v1 sti saloon which i have been rebuilding it for the last 8 months all done myself in my garage but now started it its now running p1 suspension dimpled and grooved discs 4-pot calipers front full 3'' de-cat system large tmic 44o injectors cold air feed induction kit polished and ported heads walbro pump z4 ecu with a esl board and a full facelift conversion for 2000 model prodrive oz alloys hope to speak to you soon cheers john engine sounds sweet the loudest thing under bonnet is clicking injectors BUT NOW Radiator decided to blow water pissing everywhere and ONE f'ing cam seal not sealed oil pissing everywhere now going to take most off again and change oil seal in situ john Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now