rcrad4 Posted April 13, 2012 Share Posted April 13, 2012 Any help would be greatly appreciated! I have an 88 gl ea82 and the driver side timing belt broke. I have taken all apart and have replaced tensioner pulleys and am now beginning to put the belts on. I am needing to line up my camshafts in the proper format (driver side - up) and all the instructional things I can find just says to turn the camshaft to the proper positioning but I cannot seem to get either of them to turn! What am I doin wrong here? Any ideas on how to turn the cam pulleys? thank you! Link to comment Share on other sites More sharing options...
man on the moon Posted April 13, 2012 Share Posted April 13, 2012 If you lack the tool for grabbing and turning the camshaft, put the belt on and turn the main crank pulley until the cam is lined up, then remove the belt, align the crank pulley, put the belt on again. No need to snug it all up until everything is final, just put a little tension with one hand or slip it over the tensioner without tightening it too much. You aren't starting the motor, just using the belt to turn the cam until it's in place. Once it's all in place, do tighten down, of course. Link to comment Share on other sites More sharing options...
rcrad4 Posted April 13, 2012 Author Share Posted April 13, 2012 oh ok thats a good idea. ugh why couldnt I think of that?! dang well thanks Ill go give that a shot! much appreciated Link to comment Share on other sites More sharing options...
man on the moon Posted April 13, 2012 Share Posted April 13, 2012 No problem. And do be careful--the EA82 is non-interference, so you can do this with no problem. Do it on an interference motor, though, and you'll end up replacing more than just timing belts! Link to comment Share on other sites More sharing options...
wentz912 Posted April 14, 2012 Share Posted April 14, 2012 Get er done? The belts are kind of intimidating the first time you do them , but once you understand what's going on, and get rid of all that plastic garbage, they're cake. I've only done one set and am already confident i could do another set in <30 minutes. Link to comment Share on other sites More sharing options...
rcrad4 Posted April 14, 2012 Author Share Posted April 14, 2012 yup got it done!! runnin like normal again. Thanks alot for your help! Link to comment Share on other sites More sharing options...
man on the moon Posted April 14, 2012 Share Posted April 14, 2012 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now