monkeytoe Posted April 20, 2012 Share Posted April 20, 2012 Hello All Ha I have a 2006 b9 tribeca and just bought a unaversal tras. cooler and removed the cover over the radiater to get axes to the area in front of the radiater, to place the cooler in that location. But my question is were do I hook up the cooler lines. Directly to the trans or is there a better location to hook up? Can any one help me out there With this? Link to comment Share on other sites More sharing options...
nipper Posted April 20, 2012 Share Posted April 20, 2012 Im series with the heat exchanger in the radiator. YOu still need some warmth for the fluid in winter. I usually put it in before the raditor but it doesnt really matter. If you live someplace where it gets uber cold then a coolant thermostat would be needed. Link to comment Share on other sites More sharing options...
idosubaru Posted April 20, 2012 Share Posted April 20, 2012 i bypass the radiator completely to keep it simple. i like one hose and 4 clamps rather than more hoses and more clamps. technically speaking it should be done like nipper said but i don't worry about it. Link to comment Share on other sites More sharing options...
nipper Posted April 20, 2012 Share Posted April 20, 2012 i bypass the radiator completely to keep it simple. i like one hose and 4 clamps rather than more hoses and more clamps. technically speaking it should be done like nipper said but i don't worry about it. Just curious, I have two hoses and four clamps too The justy has an oil Tstat on it, not Blu. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now