edalexandr Posted March 25, 2004 Share Posted March 25, 2004 does anybody know how to take clear coat off a paint with out hurting the paint very much?? i hate to repaint the truck:banghead: Link to comment Share on other sites More sharing options...
ru4x4ever Posted March 25, 2004 Share Posted March 25, 2004 I hear that Vegatable Oil works, the good thing is that it wont hurt your paint!! Or you can wet sand it with like 2000 or finer sandpaper then wax it that will for sure fix it and will be nice!!! -Sean Link to comment Share on other sites More sharing options...
edalexandr Posted March 25, 2004 Author Share Posted March 25, 2004 yeah i try wet sanding:eek: boy thats is some work:madder: am going to try veg oil thanks Link to comment Share on other sites More sharing options...
thealleyboy Posted March 25, 2004 Share Posted March 25, 2004 I would take some compound to it, or wet sand some extremely fine grit sandpaper. I'm talking #650 or finer. Once it's all smoothed out you can polish/wax it, and this will give you a more uniform appearance. However, the wax wont hold up for very long. You'll have to wax often (every couple months) to keep it looking good. Clear coats are a great development in paint technology. You might consider having a new coat applied if the base (color) coat is still in good condition. good luck, John Link to comment Share on other sites More sharing options...
ru4x4ever Posted March 25, 2004 Share Posted March 25, 2004 If not go the we sanding route it isnt that tough, and it should be a permanment fix:wave: Goodluck -Sean Link to comment Share on other sites More sharing options...
edalexandr Posted March 26, 2004 Author Share Posted March 26, 2004 yeah i got a electric sander:D i'll show that clear cloat huh:clap: Link to comment Share on other sites More sharing options...
Nug Posted March 26, 2004 Share Posted March 26, 2004 Careful with that. You'll go down to metal reeeeal quick. Best to wet-sand the offending areas and get clear sprayed over it again. Link to comment Share on other sites More sharing options...
edalexandr Posted March 26, 2004 Author Share Posted March 26, 2004 yeah i know:wave: but my sander is a slow working one , am going to be very carefull;) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now