subarurx yo Posted May 7, 2012 Share Posted May 7, 2012 i have a rx with front and rear disk brakes, so what is all required to swap to 5-lug. i have easy access to early legacys if those will work Link to comment Share on other sites More sharing options...
Caboobaroo Posted May 7, 2012 Share Posted May 7, 2012 This has been addressed several times. Searching is always your best bet and when in doubt, check out the USRM. Here's a thread I made a few years ago with different variations to the setup but there are specific parts needed from an XT6 to make it work. http://www.ultimatesubaru.org/forum/showthread.php?t=50400 Link to comment Share on other sites More sharing options...
wentz912 Posted May 7, 2012 Share Posted May 7, 2012 Agreed, there are several of us that have done/are doing this swap, so the parts list is pretty varied, the only thing concrete is the rear XT6 hubs and rotors. The rest is your personal choice. For example I'm using a pretty strange combination of parts, but it all bolts together so it should work just fine. Link to comment Share on other sites More sharing options...
idosubaru Posted May 8, 2012 Share Posted May 8, 2012 what is all required to swap to 5-lugmultiple ways to do it, read up on it and figure out how you want to do it. there's a sticky or thread about it in the USRM - read that first. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now