Craigsti Posted May 9, 2012 Share Posted May 9, 2012 (edited) Im having problems trying to find out why the check engine light is staying on. Motor Runs great and the check engine light stays solid on never flashes any body have any ideas this is on a 1993 Subaru loyale 1.8 Thanks I finally got it to code and it's telling me that there is a problem with the egr temp sensor can any one tell me were a outs the sensor is located at Thanks Edited May 9, 2012 by Craigsti Needed to give more info about problem Link to comment Share on other sites More sharing options...
somick Posted May 11, 2012 Share Posted May 11, 2012 It is in back of the oil dipstick. Remove the plastic cover and you will see two small soleniods with two wire connctors. They suppose to have a vent on the side. Check the resistance. As far as I remember it suppose to be 36 Kohm. Search the forum for EGR solenoid and you will find a lot of information. This is a very common promblem with EA82 engine. Good luck, Sam Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 11, 2012 Share Posted May 11, 2012 Are you sure it's the EGR temp sensor and not the EGR solenoid code? That's a california only sensor.... it will be in the EGR passage - so likely on the manifold near the EGR valve or pipe. GD Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now