pr8head Posted May 15, 2012 Share Posted May 15, 2012 HELP! Well my ol sub to a big dump today the rear suspension crossmember broke off on the inboard side of the mount on the drivers side. Every website I look at has the 2wd crossmember but states 4wd is discontinued!? Heres the stupid part of the question are they the same? I can't just ditch the car I've got to much dough rapped up in it. Is there a way to cobble it back together with a pipe inside? When the horse is dead whack it til it revives! Thanks!!! Tim Link to comment Share on other sites More sharing options...
TomRhere Posted May 15, 2012 Share Posted May 15, 2012 2WD-4WD are different. Best bet is salvage yard or someone on here parting out a 4WD EA82. Link to comment Share on other sites More sharing options...
987687 Posted May 15, 2012 Share Posted May 15, 2012 Except for the mount for the diff, are there any other differences in the 2wd one? If that's the only difference, I wonder if one could just cut it off the old one, or fab a new diff mount. I've had to do the same replacement on mine, besides finding the part, it's a pretty easy job. You unbolt everything from the tube, then just take the tube off. Here's right before I started unbolting the tube. Link to comment Share on other sites More sharing options...
AKghandi Posted May 15, 2012 Share Posted May 15, 2012 I had an xt with this problem so i jammed a pipe in it. Worked great. Normally i wouldnt do that but it knocked and there was no tittle. Link to comment Share on other sites More sharing options...
pr8head Posted May 16, 2012 Author Share Posted May 16, 2012 I found one on ebay I think it might be the last one on earth LOL. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now