808Legacy Posted May 21, 2012 Share Posted May 21, 2012 I need to replace my driver's door cylinder and my ignition cylinder, so I am thinking that I ought to go ahead and replace the passenger and rear door cylinders to match. Does anyone know if I can replace all of them with one set, or do I need to go to a locksmith to re-key the working ones and match them all? Thanks in advance! Link to comment Share on other sites More sharing options...
lmdew Posted May 21, 2012 Share Posted May 21, 2012 I have several Ignition with keys. You can pop the door cylinders had have the re keyed. I've done several myself, just pulling the key tabs out and switching them to make them work with the Key for the Ign. What year and model? Link to comment Share on other sites More sharing options...
808Legacy Posted May 21, 2012 Author Share Posted May 21, 2012 94 Legacy Fwd SW The door lock doesn't turn at all, the ignition has to be backed off after the first try and angled just right on the second try. I've posted about that before, but thought I'd start over since now I'm thinking about doing both. Link to comment Share on other sites More sharing options...
lmdew Posted May 22, 2012 Share Posted May 22, 2012 You have to pay a price for all that salt air! I think the ignition locks wire is different. You might be able to make a newer one work. I could pull a set for you, but it might be awhile. Check the following for the cost and throw in a Kimo Tee + shipping. http://www.upullandpay.com/locations/coloradosprings/default Link to comment Share on other sites More sharing options...
808Legacy Posted May 22, 2012 Author Share Posted May 22, 2012 ah, you're in CS, where I grew up. I'm not sure about shipping it out here, as everything costs way more to ship to Hawaii. From another thread, it sounds like I might need to replace the starter/solenoid (which that site lists for $17.99, plus $5.25 core, not bad). Maybe you could send it to me in CA and I will fly over with it (that's where I am until mid June). Gladly get you a Kimo's T! Link to comment Share on other sites More sharing options...
lmdew Posted May 23, 2012 Share Posted May 23, 2012 Sure, I can ship it were you want. I get a pretty good FedEx discount and Flat rate UPSP is always good. Yes in Colorado Springs, CO Larry Link to comment Share on other sites More sharing options...
1997reduxe Posted May 26, 2012 Share Posted May 26, 2012 I assume you already did the oil/graphite thing, right? Link to comment Share on other sites More sharing options...
808Legacy Posted May 28, 2012 Author Share Posted May 28, 2012 mmm...no, thanks for reminding me. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now