my 2/3" lift. radius rod blocks??

[tallwelder81]

i have my brat mostly lifted. 2 in rear, 2.5 in front.

but i cant figure out how the radius rod lift works out?

 

do i need 2 blocks, 1 per side? with 1 bolt per block?

cuz that is what i was given with my kit. but it seems

like i must need more blocks.

 

can anyone send me a clear pic of that area, on a lifted brat?

 

 

alos, if i am lifting my front body 2.5 inches, does my

steering shaft need extension? or will it work fine stock?

 

pics of front chassis area on lifted brat, please???

the swaybar/radius rod/tranny area. or ANYTHING.

[Gloyale]

Radius rod mounts with 3 blocks, or at least 1 long w/2 holes and 1 short(per side)

 

Steering shaft will definately need lengthed.

[Uberoo]

only if your keeping the sway bar.other wise just two.

[tallwelder81]

should i NOT keep the sway bar?

 

why wouldnt i want a swaybar?

 

i dont do much crawling. just, you know, 30mph logging road rally.

 

and the occasional curb hop, or 2'x2' ditch crossing. nothing extreme.

 

i do about 90 miles of street driving for every 10 miles of gravel or dirt or mud or snow.

[Uberoo]

the sway bar really kills wheel travel,so it will ride rougher on logging trails with it on there.

 

just without the swaybar it will handle like an old truck,with a low center of gravity.try it with and without the swaybar and see what way you like best.The swaybar is always the first thing to go on my subarus.

[Cyfun]

You will probably want to ditch the sway bar. I had to remove mine after my 2" lift simply because it didn't line up anymore with the control arms, and would also rub on my tires if I turned to full lock.