natext6 Posted May 31, 2012 Share Posted May 31, 2012 (edited) I've been having an issue recently. My engine ticks.....sometimes quite angrily, sometimes just a bit, sometimes not at all. I've made sure that I have enough oil in it numerous times, but everytime, its full. The ticking correlates to my RPMs, in that as my rpms rise, so does the ticking accelerate accordingly. Someone I know suggested that it may be a lazy lifter... I don't really know what that is or means. Any ideas? Is this the tick of death I've heard so much about D= Car is a 1989 5spd xt6 Edited May 31, 2012 by natext6 Link to comment Share on other sites More sharing options...
l75eya Posted May 31, 2012 Share Posted May 31, 2012 Is this the tick of death I've heard so much abou Sounds like it to me =\ Link to comment Share on other sites More sharing options...
shortysayhi Posted May 31, 2012 Share Posted May 31, 2012 This happened to our Acura legend. We talked to numerous people and they said try a quart of ATF in with the oil. It has worked for us. We also change the oil (with ATF) every 1000 miles. Link to comment Share on other sites More sharing options...
natext6 Posted May 31, 2012 Author Share Posted May 31, 2012 What's atf? Also, I'm not hugely concerned, it's mostly just annoying. I don't plan on keeping the current engine in the car much longer anyway But ya, ATF? Link to comment Share on other sites More sharing options...
shortysayhi Posted May 31, 2012 Share Posted May 31, 2012 Automatic transmission fluid. Yes it sounds weird to mix oil and transmission fluid. There's another thread where someone else said the same thing. It does work even tho your not keeping the engine it should last till you are ready for your new one Link to comment Share on other sites More sharing options...
FlatFourFrenchy Posted May 31, 2012 Share Posted May 31, 2012 Read up on the other post about tick of death and fix. Mine has been ticking for over 30k soI don't think the death part is very accurate. Still gets uppper twenties in mpg and will roll along at 85 mph all day long. It is annoying nonetheless. Link to comment Share on other sites More sharing options...
idosubaru Posted May 31, 2012 Share Posted May 31, 2012 progress as follows for ticking HLA's: 1. change oil 2. reseal the oil pump 3. replace the oil pump 4. have HLA's rebuilt (mizpah like $3 each) and reseal the cam carrier with a new metal reinforced oring from Subaru (or thepartsbin.com) I have personally never had to go to step 4. Steps 2 and 3 have worked numerous times for me. I sometimes simply skip step 3 so as not to do the work twice (steps 3 then 4). ATF can help as well, I've done that before but don't any more. Change the oil often. Link to comment Share on other sites More sharing options...
natext6 Posted May 31, 2012 Author Share Posted May 31, 2012 Thanks Gary! Excellent list! I'm going with the reseal first I think! I've had the oil changed a few times while the has been happening. I've had everything in it. currently I'm running 10w30. I don't know if that's useful info or not =P Link to comment Share on other sites More sharing options...
idosubaru Posted May 31, 2012 Share Posted May 31, 2012 i don't think oil type or viscosity makes any difference. i've seen it "change" with lower and heavier weight oil - probably incidental. "correlation does not mean causation"....lifter tick is so volatile that if it goes away after putting something in it - doesn't really mean it helped or made it worse. probably just the come-and-go factor of the ticking more often than not. a reseal is definitely worth it - it's actually not hard at all, the timing covers are sometimes the biggest pain. after that it's really not hard and can be rather quick. might want to have cam and crank seals on hand and check to see if yours are wet and possibly replace the timing belts while they're off. they can be had cheap from someone on the board or ebay or rockauto, etc. i have had Fel-Pro crank seals not seat properly on EA/ER engines so i would probably stick with Subaru for the engine seals. Link to comment Share on other sites More sharing options...
natext6 Posted May 31, 2012 Author Share Posted May 31, 2012 Timing belts >_<" this is why I want an ez30. Link to comment Share on other sites More sharing options...
Rust Posted June 1, 2012 Share Posted June 1, 2012 Using ATF, seafoam, Gunk engine cleaner...ect works for me. I would not recommend using any of these products as an additive for daily driving. They are cleaning agents and should be drained out after briefly running in the engine to flush out sludge. If you want an additive to run on a regular basis try Risoline. Link to comment Share on other sites More sharing options...
ShawnW Posted June 2, 2012 Share Posted June 2, 2012 Timing belts >_ Its not all perfect but I like how you think. 3 o2 sensors, large wiring harness to add to the car, fuel pump control unit if you dont use a 2001 engine, there is still a chain in there and while it lasts a long time its not necessarily a forever item, huge alum chain cover likes to leak, scanner required to pull codes..... Link to comment Share on other sites More sharing options...
ivans imports Posted June 2, 2012 Share Posted June 2, 2012 oil pump shaft seal same problem as ea82 is caused by oil geting airated change the oil pump shaft seal orinrg and micky mouse oring and should be fixed Link to comment Share on other sites More sharing options...
Caboobaroo Posted June 2, 2012 Share Posted June 2, 2012 Its not all perfect but I like how you think. 3 o2 sensors, large wiring harness to add to the car, fuel pump control unit if you dont use a 2001 engine, there is still a chain in there and while it lasts a long time its not necessarily a forever item, huge alum chain cover likes to leak, scanner required to pull codes..... The hydraulic chain tensioners can bleed pressure off and cause chain noise. Head gaskets can fail internally when over heated a bit. Choice of transmission can be limited because the EZ30 uses a pulse signal from the torque converter. Unless you can be confident in working othe 3.0 with its chains and 100 timing case bolt, it can get intimidating. Link to comment Share on other sites More sharing options...
natext6 Posted June 2, 2012 Author Share Posted June 2, 2012 I wonder if I could find a mechanics training course online for it. You can bittorrent anything these days. Link to comment Share on other sites More sharing options...
ShawnW Posted June 4, 2012 Share Posted June 4, 2012 The books or a video? The Subaru training is essentially a lab environment and technicians reference booklets. Link to comment Share on other sites More sharing options...
natext6 Posted June 4, 2012 Author Share Posted June 4, 2012 The books or a video? The Subaru training is essentially a lab environment and technicians reference booklets. Either! Both! Anything:lol: I havent found much that has interested me like this learning process has! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now