tractor pole Posted June 13, 2012 Share Posted June 13, 2012 so as the title says, I am looking for pics that show EJ radiator in an EA82 specifically noting clearance, fan placement, how you mounted it etc. thanks in advance Ben Link to comment Share on other sites More sharing options...
Tosh Posted June 13, 2012 Share Posted June 13, 2012 Zip ties all day. I drilled another hole so it goes into the lower mount but it still sits a slight angle. Link to comment Share on other sites More sharing options...
tractor pole Posted June 15, 2012 Author Share Posted June 15, 2012 thanks for the reply. that is an Impreza radiator correct? did you have to re-drill the holes in the bottom for the mount? Link to comment Share on other sites More sharing options...
Prwa101 Posted June 15, 2012 Share Posted June 15, 2012 http://www.ultimatesubaru.org/forum/showthread.php?t=127240&page=5 Here's what I did, not the prettiest but works great! -Prwa AAE Link to comment Share on other sites More sharing options...
tractor pole Posted June 15, 2012 Author Share Posted June 15, 2012 http://www.ultimatesubaru.org/forum/showthread.php?t=127240&page=5 Here's what I did, not the prettiest but works great! -Prwa AAE cool! thanks Link to comment Share on other sites More sharing options...
obk25xt Posted June 15, 2012 Share Posted June 15, 2012 Curious, why not get a copper/brass ea82 radiator and have 1.5" inlet/outlet brazed onto it? That's what I did. Used a 2 row ea82 turbo radiator, and a shop did the work to modify it for $40 out the door. Fits like a glove, I'll put pics in my build thread soon. Link to comment Share on other sites More sharing options...
Gloyale Posted June 15, 2012 Share Posted June 15, 2012 (edited) Curious, why not get a copper/brass ea82 radiator and have 1.5" inlet/outlet brazed onto it? That's what I did. Used a 2 row ea82 turbo radiator, and a shop did the work to modify it for $40 out the door. Fits like a glove, I'll put pics in my build thread soon. try finding a good two row EA82 radiator. Hen's teeth. Don't get me wrong, it's a great solution. But there simply are getting to be more EJ swapped cars than there are 2 row EA82 radiators floating around. The junkyards aren't really keeping the old cars anymore. Modify the car to fit an EJ radiator, and you're good to go. If you need a new radiator, you can order one off the shelf. Full disclosure, my EJ22 wagon has the stock EA82 radiator in it. 18" flex hose with a 1-1/2" outlet one end, and 1-1/4" on the other from Napa makes the fit for lower hose. Upper hose is a stock EJ hose with a chunk of old EA hose as a spacer. Works fine so far, although summer is coming.....may need to get the EJ rad in there before too long. Edited June 15, 2012 by Gloyale Link to comment Share on other sites More sharing options...
obk25xt Posted June 15, 2012 Share Posted June 15, 2012 Most of the EJ radiators a single row anyhow. The way I look at it, a single row EA radiator, even necked down, will likely be sufficient. Start getting into turbos and the story may change. But even hi comp/cammed EJ's should be good. Really it's more about the ability to remove the heat from the radiator than it is the capacity and or flow. These are both important, yes, but a GOOD electric fan is more important IMO (stress the IMO!). Link to comment Share on other sites More sharing options...
Numbchux Posted June 15, 2012 Share Posted June 15, 2012 I've said it before, and I'll say it again. The radiator is not the weak link in the EA82 cooling system. I daily drove my EJ22 loyale on the stock, 180k mile, single-row radiator with no fans for most of the year. Just had to watch it when you're going less than 20mph or so (I live in an area where stop and go traffic is non existent). When that radiator finally corroded it's way to pieces (pull-through aftermarket fan mounts put a few nails in that coffin), I switched to an all-metal one from performance radiator: https://shop.performanceradiator.com/index.php?route=product/product&path=1_32557_32785_32786_32787&product_id=10879 Stock Outback hoses, with a spacer at each end to make up the difference in diameter. Done. Link to comment Share on other sites More sharing options...
T'subaru Posted June 16, 2012 Share Posted June 16, 2012 Heres what I did to run an ej radiator. Cooling fans will have to be in front of the radiator. http://www.ultimatesubaru.org/forum/showthread.php?t=112285&highlight=T%27sunami+Wagon&page=6 Link to comment Share on other sites More sharing options...
tractor pole Posted June 16, 2012 Author Share Posted June 16, 2012 Heres what I did to run an ej radiator. Cooling fans will have to be in front of the radiator.http://www.ultimatesubaru.org/forum/showthread.php?t=112285&highlight=T%27sunami+Wagon&page=6 Hey you have the same threaded insert tool I do! that looks really clean :cool: how is the clearance between the crank pulley and radiator? Ben Link to comment Share on other sites More sharing options...
tractor pole Posted June 16, 2012 Author Share Posted June 16, 2012 I wasn't intending on starting a flame war. I am aware that the two row radiator can be fitted with the 1.5 inlet/outlet, I personally have a hard time spending $150+ for a brand new one then voiding the warranty before I even put antifreeze in it. Like Gloyale said, they are few and far between in wrecking yards even up here. I am thinking that a single row will be more than sufficient for this application (no turbo or high compression) Thanks for all the replies, Ben Link to comment Share on other sites More sharing options...
T'subaru Posted June 16, 2012 Share Posted June 16, 2012 I wont have the engine installed until later this summer so I cant answer your clearance question yet. I purchased mine from performance rad, it has a 5/8 core as well. riv nut tools are awesome:) Link to comment Share on other sites More sharing options...
subynut Posted June 17, 2012 Share Posted June 17, 2012 I have a stock single row EA82 radiator with two 10" pushers controlled by the EJ comptuer in the PandaWagon and it has no issues whatsoever with heat. Cruising through the desert heat on the interstate or blastin' through the Rally-X course - no heat troubles here. Link to comment Share on other sites More sharing options...
kanurys Posted June 18, 2012 Share Posted June 18, 2012 I have a stock single row EA82 radiator with two 10" pushers controlled by the EJ comptuer in the PandaWagon and it has no issues whatsoever with heat. Cruising through the desert heat on the interstate or blastin' through the Rally-X course - no heat troubles here. That's exactly my setup. I even used the EJ relays for the fans, so the ECU will be happy. We'll see if it works for 4x4 crawling at high altitude. Link to comment Share on other sites More sharing options...
Tosh Posted June 19, 2012 Share Posted June 19, 2012 yeah I only ghetto rigged my EJ radiator in there because it was free and my EA one was trashed. Link to comment Share on other sites More sharing options...
Prwa101 Posted June 19, 2012 Share Posted June 19, 2012 Same here. Free is good Link to comment Share on other sites More sharing options...
Tosh Posted June 20, 2012 Share Posted June 20, 2012 I do have a really nice ea81 radiator ( think its a two row) anyone know how hard it is to fit an ea81 radiator in a ea82 with a lift and EJ22 swap? Link to comment Share on other sites More sharing options...
subynut Posted June 20, 2012 Share Posted June 20, 2012 I think the EA81 radiators are taller and narrower than the EA82's. But I'm sure with a little fab work they could be retrofitted to fit. Link to comment Share on other sites More sharing options...
obk25xt Posted June 21, 2012 Share Posted June 21, 2012 Stock Outback hoses, with a spacer at each end to make up the difference in diameter. Done. What year?! I already have the upper one figured out. No problem there. I went and picked one up for a 2003 outback today and it doesn't work with my setup. Link to comment Share on other sites More sharing options...
Numbchux Posted June 21, 2012 Share Posted June 21, 2012 What year?! I already have the upper one figured out. No problem there. I went and picked one up for a 2003 outback today and it doesn't work with my setup. I got hoses for a '98 Outback (Outback, because with the subframe spacers, the lower hose has a slightly different bend in it since the engine sits lower. Other EJ cross-flow lower hoses will fit, but not quite as well). I'm not sure if they went to vertical flow by 2003, but that could effect it. The Loyale radiator is also key. '80s EA82 rads have the lower output coming out of the end tank with a pretty steep angle upward, but '90-'94 Loyale rads have the lower port coming straight out. Link to comment Share on other sites More sharing options...
obk25xt Posted June 21, 2012 Share Posted June 21, 2012 I got hoses for a '98 Outback (Outback, because with the subframe spacers, the lower hose has a slightly different bend in it since the engine sits lower. Other EJ cross-flow lower hoses will fit, but not quite as well). I'm not sure if they went to vertical flow by 2003, but that could effect it. The Loyale radiator is also key. '80s EA82 rads have the lower output coming out of the end tank with a pretty steep angle upward, but '90-'94 Loyale rads have the lower port coming straight out. Cool, I'll go exchange it tomorrow and see if the earlier one fits better. I had 1.5" inlet outlet brazed onto an early style rad that was originally the upswept style you mentioned. Now they are both straight out. Thanks for the info I appreciate it. Link to comment Share on other sites More sharing options...
presslab Posted June 21, 2012 Share Posted June 21, 2012 Another option with the upswept outlet (especially to use a 2-row) is to connect a couple copper elbows together to bend it around. You can see it in this pic at the middle right side. Link to comment Share on other sites More sharing options...
obk25xt Posted June 22, 2012 Share Posted June 22, 2012 Went and got the lower hose for a 98 outback. Fits like a glove. Thanks for the info numbchux, much appreciated! Link to comment Share on other sites More sharing options...
Numbchux Posted June 22, 2012 Share Posted June 22, 2012 Went and got the lower hose for a 98 outback. Fits like a glove. Thanks for the info numbchux, much appreciated! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now