SLCPUD Posted July 11, 2012 Share Posted July 11, 2012 (edited) I have a 1988 DL with SPFI. I rebuilt EA82 engine two years ago and has good performance. Now, car sputters and stalls as if no fuel. Replaced original fuel pump and filter and it worked fine for a few days then it all happened again. Doesn't start now. Pump appears to work when bypassed. Perhaps some sensor/electrical component is preventing the fuel pump to work improperly? Edited July 11, 2012 by SLCPUD wording + more information Link to comment Share on other sites More sharing options...
djellum Posted July 11, 2012 Share Posted July 11, 2012 theres a fuse in the fusebox I believe that protects the pump, check it and see if its blown. also there should be a relay that cuts off the fuel pump in case of an accident, you can check that as well. Link to comment Share on other sites More sharing options...
l75eya Posted July 11, 2012 Share Posted July 11, 2012 Check your fuel filters again. If you had the same gas in the car that caused this last time, maybe there's something in your tank clogging your filters. Link to comment Share on other sites More sharing options...
Prwa101 Posted July 11, 2012 Share Posted July 11, 2012 Fuel pump relay?? under the dash, blue plug? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 12, 2012 Share Posted July 12, 2012 Lets clear up a few things: 1. You say it "appears" to work when bypassed. I assume you mean the power supply is being bypassed... what do you mean by "appears"? Does it run perfectly when you apply an outside voltage and ground? 2. Have you done a fuel pressure test? Replaced the filter? GD Link to comment Share on other sites More sharing options...
Dee2 Posted July 13, 2012 Share Posted July 13, 2012 When fuel pumps start to go out they can still work intermittently. So, seeing it work doesn't mean it isn't the problem. Sounds like a fuel pump problem to me. Link to comment Share on other sites More sharing options...
Cougar Posted July 14, 2012 Share Posted July 14, 2012 Verify power is getting through fuse 11 in the dash, it supplies power to the pump. If that is ok then check the relay to see if it is operating and working ok. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now