LeoneTurbo Posted July 25, 2012 Share Posted July 25, 2012 I'm about to start the modification of cable clutch to hydraulic clutch on my EA81 wagon but before I start gathering parts, who's done a similar mod and is willing to share details? Thanks! Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 25, 2012 Share Posted July 25, 2012 I know that RGuyver did it. You might look him up and send him a message or email, etc. GD Link to comment Share on other sites More sharing options...
suberdave Posted July 31, 2012 Share Posted July 31, 2012 i have done it many times on EA82 cars. cant imagine its that much different on an EA81... just pull the stock pedal box. put the hydro box in place. and drill 3 holes for the clutch master. and bolt it up... just did one on my Subercoupe. took about 45 min. -=Suberdave=- Link to comment Share on other sites More sharing options...
LeoneTurbo Posted August 1, 2012 Author Share Posted August 1, 2012 That's good to hear. I've got a 2006 WRX pedal box on the way so will look into it. The dash is already removed so should be a piece of cake then Link to comment Share on other sites More sharing options...
LeoneTurbo Posted August 5, 2012 Author Share Posted August 5, 2012 The heater pipes are very close to the throttle pedal on the EA81 cars so I'm not sure if there's enough space for the clutch lever/cylinder. Will check end of this week when I have the time to move the car out of storage. Link to comment Share on other sites More sharing options...
ShawnW Posted May 20, 2014 Share Posted May 20, 2014 Bumping this up thinking about trying it. But does it work? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now