O.C.D. Posted August 10, 2012 Share Posted August 10, 2012 As stated, I need a set that are in great shape. Paint doesn't matter but rust free and damage free preferred. I bought the fiberglass ones listed in here and they are just beyond easy fixing. I see myself investing way too much time into them. SO I am hoping that one or some of you nice people can help me out please. I would really appreciate it and will pay for shipping of course. Thank you and please help if you can. Link to comment Share on other sites More sharing options...
O.C.D. Posted August 13, 2012 Author Share Posted August 13, 2012 Please, anybody?!?!?!? I know these are super rare but I am at a complete loss til I get some. Anyone with a spare set or project wagon/brat. Thanks. Link to comment Share on other sites More sharing options...
BlindSight Posted August 13, 2012 Share Posted August 13, 2012 Wish I knew of some but I am rocking a rusty set myself. Best of luck. Link to comment Share on other sites More sharing options...
O.C.D. Posted August 14, 2012 Author Share Posted August 14, 2012 My stockers are so bashed that I can't even begin to reshape the front end. Both corners are smashed in pretty good. I am going to keep pestering on here as I pray someone will come to "The Squirrels" rescue. Link to comment Share on other sites More sharing options...
SUBARU3 Posted August 14, 2012 Share Posted August 14, 2012 Nothing on www.car-part.com Link to comment Share on other sites More sharing options...
O.C.D. Posted August 15, 2012 Author Share Posted August 15, 2012 I called 3 different yards out of the list from car-part.com and not a single person could help me or call me back. But I am not giving up and going to continue tomorrow. Link to comment Share on other sites More sharing options...
81MV Posted August 15, 2012 Share Posted August 15, 2012 I know a source with a brand-new pair of genuine Subaru wings here in the UK, but shipping will be a killer... but just in case you get really stuck! Link to comment Share on other sites More sharing options...
SUBARU3 Posted August 15, 2012 Share Posted August 15, 2012 What's your budget on these? Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted August 15, 2012 Share Posted August 15, 2012 As stated, I need a set that are in great shape. Paint doesn't matter but rust free and damage free preferred. I bought the fiberglass ones listed in here and they are just beyond easy fixing. I see myself investing way too much time into them. SO I am hoping that one or some of you nice people can help me out please. I would really appreciate it and will pay for shipping of course. Thank you and please help if you can. I have a set not perfect but solid in NW WA Link to comment Share on other sites More sharing options...
BlindSight Posted August 16, 2012 Share Posted August 16, 2012 So whats so bad about the fiberglass fenders? Thought they just had a little bubbling. Link to comment Share on other sites More sharing options...
O.C.D. Posted August 16, 2012 Author Share Posted August 16, 2012 (edited) I know a source with a brand-new pair of genuine Subaru wings here in the UK, but shipping will be a killer... but just in case you get really stuck! Can you by chance tell me what they cost? If I have to I will pay to get them. You aren't the guy I bought my 4 new Brat lenses from by chance are you? What's your budget on these? Define budget. I have already wasted the $160 on the fiberglass ones. I am willing to do what is needed. I know these are rare but I am sure I will get some. fingers crossed. I have a set not perfect but solid in NW WA Very interested. Can you please describe condition and or post pics please. I am not worried about some dents and dings but no rusty upper edges and no smashed corner light areas. Hopefully no rusted through arches etc.. I know I can't be too picky. Thanks So whats so bad about the fiberglass fenders? Thought they just had a little bubbling. Again, I do not want to knock the source or the fact that they are available. If you are a master with fiberglass then these can work. There is the bubbling but more important is the bad fitment. They need to be lengthened height wise. The lower mountpoints will not work until height is added, about 3/8". There is a fold over on the door seem that needs to be removed and modified to avoid the hinge. The top part that rests on the frame is too thick to allow the hood to close. That same area is also not at a 90 degree angle so the fender is in the way of the hood. Hood will not close unless thinned out but you can't really thin these out without losing integrity. So you would have to cut the bolt mount strip completely off the fender and re-fiber them straight. Light mounting points are holes and won't accept stock plastic ears that are square. Etc, etc....... I can make almost anything work and love the hobby/project. I just don't see these being worth the time. I truly wanted steel OEM anyways but these fiberglass seemed like a great option. Again, not knocking the source. I'm not going to settle. I am too into this Brat to half @55 it. Edited August 16, 2012 by O.C.D. Link to comment Share on other sites More sharing options...
81MV Posted August 20, 2012 Share Posted August 20, 2012 Hi OCD I'll try to find out for you. They're at a former Subaru dealer I spoke to a few weeks ago. p.s. Yes, I supplied the lamp lenses! Link to comment Share on other sites More sharing options...
O.C.D. Posted August 21, 2012 Author Share Posted August 21, 2012 Sweet, I thought so. Look at the members rides and see my new thread. They are proudly on display now. Just the rears for now, but they look great! Thanks for checking for me and for the lenses. Link to comment Share on other sites More sharing options...
O.C.D. Posted August 29, 2012 Author Share Posted August 29, 2012 Shameless bump if I may. Really would appreciate any help locating a set. Any of you stash guys who could lend a hand to restore another gen 1. I would be indebted!!! Link to comment Share on other sites More sharing options...
O.C.D. Posted September 13, 2012 Author Share Posted September 13, 2012 Bi-weekly shameless bump. I guess I really can't beg anymore than I have. But I will be vigilant!!!! Anyone? Bueller? Link to comment Share on other sites More sharing options...
81MV Posted September 14, 2012 Share Posted September 14, 2012 Hi OCD Apologies for the delay in responding (been on holiday). OK, I have located a pair of steels but the problem is shipping - I can't find a suitable way of getting them to the US. If you can find a way - let me know! p.s. the dealer is looking for £100 each but if you're serious I'll bash him over the head. Pattern ones are available in the UK at around half this amount. Link to comment Share on other sites More sharing options...
O.C.D. Posted September 17, 2012 Author Share Posted September 17, 2012 Hi OCD Apologies for the delay in responding (been on holiday). OK, I have located a pair of steels but the problem is shipping - I can't find a suitable way of getting them to the US. If you can find a way - let me know! p.s. the dealer is looking for £100 each but if you're serious I'll bash him over the head. Pattern ones are available in the UK at around half this amount. No apologies - we all have busy lives. I cannot imagine how bad shipping would be to the states for those. I am almost sad to say I wouldn't be interested. For that size and weight I am thinking a few hundred dollars if not more. I have a lead on some at the moment but if all else fails I will go the UK route. Thank you for your time in searching for me. Link to comment Share on other sites More sharing options...
NLAParts Posted September 18, 2012 Share Posted September 18, 2012 I think I still have one RF fender from a '78 in good condition. Located in SE Idaho. Charlie 208-787-2495, email idpv@ida.net Link to comment Share on other sites More sharing options...
O.C.D. Posted September 18, 2012 Author Share Posted September 18, 2012 Turbosubarubrat saves the day!!! Thank you so much for leading me to these: Now here is to hoping they arrive in good shape. Link to comment Share on other sites More sharing options...
SUBARU3 Posted September 19, 2012 Share Posted September 19, 2012 Yipee:headbang: I'm happy for you! Link to comment Share on other sites More sharing options...
O.C.D. Posted September 19, 2012 Author Share Posted September 19, 2012 Thanks Todd! Cost more than the whole Brat, lol. almost Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now