Lachlan Posted September 29, 2012 Share Posted September 29, 2012 I've noticed I can adjust the ride height on via the front struts by about an inch, but I can't identify a similar adjustment in the rear. Is there one hiding under there somewhere? Link to comment Share on other sites More sharing options...
Crazyeights Posted September 29, 2012 Share Posted September 29, 2012 It's a single bolt on the top of the rear suspension tube in the center, pointing up at the bottom of the body. Somewhere close to the front of the rear diff I think. Link to comment Share on other sites More sharing options...
Lachlan Posted September 29, 2012 Author Share Posted September 29, 2012 Do you have a pic or a diagram? I've been looking all up under there and haven't found any bolts visible on the centerline. Link to comment Share on other sites More sharing options...
Leeroy Posted September 30, 2012 Share Posted September 30, 2012 The adjustment bolt is on the Gen 2 models but not the Gen 1's... You can still adjust the rear ride height by re-clocking the torsion bars on each side. Link to comment Share on other sites More sharing options...
Crazyeights Posted September 30, 2012 Share Posted September 30, 2012 Sorry, I missed that this was about a Gen 1. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now