sube101 Posted September 29, 2012 Share Posted September 29, 2012 I'm starting a full business making Subaru parts intakes, some bumpers, bull bars, headers etc.... I need product ideas. If there's a part you want made better that you already have? Send me a picture and give me a description Link to comment Share on other sites More sharing options...
herb Posted September 29, 2012 Share Posted September 29, 2012 A winch-mount front bumper and swinging, spare-holding rear bumper with gas can mount(s) would be nice. rocker panel armor/sliders, maybe some integrated skid plates with said products. maybe its just me, but I'd really like to see an extended, long travel set up similar to what the prerunner guys run; but when you start spending more on suspension then your car's worth things can get real impractical real quick... Link to comment Share on other sites More sharing options...
92_rugby_subie Posted September 30, 2012 Share Posted September 30, 2012 Skidplates Light guards Roof racks Roll cages/Roll bars I bet you could get a pretty good EA series strut bar made and people would want it... Link to comment Share on other sites More sharing options...
AKghandi Posted October 2, 2012 Share Posted October 2, 2012 4x100 hub redrills theres alot of 2wd people who would want that. SNORKEL. Thats all i can think of that isnt already being made. Link to comment Share on other sites More sharing options...
sube101 Posted October 2, 2012 Author Share Posted October 2, 2012 I'm going for mainly headers but ill do a line of bumpers when I figure a good design. And roll bars that are strictly for looks. Link to comment Share on other sites More sharing options...
Fairtax4me Posted October 2, 2012 Share Posted October 2, 2012 Any plans for dual port EJ headers? (I still need to order my SPH! Hell I was the one who suggested that whole idea! My check from da gumment aint showed up yet... :-p Damn Student loan disbursements take FOREVER!!!) Custom cat-backs maybe? (or cat to muffler at least) Lots of tube bumpers! That's all I can think of. Link to comment Share on other sites More sharing options...
sube101 Posted October 2, 2012 Author Share Posted October 2, 2012 I'm going to be working on an un equal length header this weekend however I need donor cars for test fitment and for making custom aluminum intakes. Link to comment Share on other sites More sharing options...
oregoncoast Posted October 2, 2012 Share Posted October 2, 2012 I'm going to be working on an un equal length header this weekend however I need donor cars for test fitment and for making custom aluminum intakes. What kind of deal do the donor car owner get?? Link to comment Share on other sites More sharing options...
sube101 Posted October 2, 2012 Author Share Posted October 2, 2012 Donor car gets 25 % off. Link to comment Share on other sites More sharing options...
ivans imports Posted October 2, 2012 Share Posted October 2, 2012 Howbout do it your self subaru speacalty tools have some realy good homade subaru tools and diagnostic tools Link to comment Share on other sites More sharing options...
sube101 Posted October 2, 2012 Author Share Posted October 2, 2012 Not able to make diagnostic or specialty tools unfortunately Link to comment Share on other sites More sharing options...
idosubaru Posted October 2, 2012 Share Posted October 2, 2012 I'm going for mainly headerseast coast folks need exhaust parts due to rust. both daily drivers i've had to weld back together and my buddies we just did last month and another forester needs more welding....all 2000+ model Subaru's. but, all older subaru's have rusted away so the market around here for old stuff is almost non existent. my last 2 1980's Subaru's I bought came from Texas and California. Link to comment Share on other sites More sharing options...
tractor pole Posted October 2, 2012 Share Posted October 2, 2012 what about a light bar with skid plate that is all under the front bumper something similar to this but for an EA82 car Link to comment Share on other sites More sharing options...
nipper Posted October 3, 2012 Share Posted October 3, 2012 http://www.ultimatesubaru.org/forum/showthread.php?t=119224 one of these! Link to comment Share on other sites More sharing options...
sube101 Posted October 3, 2012 Author Share Posted October 3, 2012 Those do look good. I'll see about something like that after the header prototyping. Now how about some company name suggestions Link to comment Share on other sites More sharing options...
ystrdyisgone Posted October 9, 2012 Share Posted October 9, 2012 Dirty Wagon Industries? DWI for short, might be kinda catchy.. may mislead customers to think you only make things for wagons though.. Soobtubes/Soobtoobs? STS for short? Considering the round nature of your products.. I'll let you know if any more pop into the ol noggin. Link to comment Share on other sites More sharing options...
sube101 Posted October 9, 2012 Author Share Posted October 9, 2012 I'm going to be building products for other cars as well. I think I may go with edge fabrication.or baha fabrication/ performance exhaust Link to comment Share on other sites More sharing options...
ivans imports Posted October 9, 2012 Share Posted October 9, 2012 Better bumper side mounting for all plastic bumper cars and rad support protectors to prevent tow truck damage have had many with rad support pushed up by tow trucks causes unseen but bad damage Link to comment Share on other sites More sharing options...
sube101 Posted October 11, 2012 Author Share Posted October 11, 2012 business is official. company name is inferno fabrications LLC. no i need some people for donor cars. preferably willling to leave their car for a full day or weekend. to get some intakes built. some headers. will be doing other cars besides subaru as well. website should be up and running in a week or so. Link to comment Share on other sites More sharing options...
oregoncoast Posted October 11, 2012 Share Posted October 11, 2012 business is official. company name is inferno fabrications LLC. no i need some people for donor cars. preferably willling to leave their car for a full day or weekend. to get some intakes built. some headers. will be doing other cars besides subaru as well. website should be up and running in a week or so. Good Luck with your new venture!! Link to comment Share on other sites More sharing options...
sube101 Posted October 11, 2012 Author Share Posted October 11, 2012 i thought i replied to your pm but it looks like i forgot to hit send. what is it that you would like built for you car? i was a bit confused on what your ideas were about your project Link to comment Share on other sites More sharing options...
Pooparu Posted October 11, 2012 Share Posted October 11, 2012 I need hubs to convert to a 4x100 lug pattern. Link to comment Share on other sites More sharing options...
Bratsky Posted October 11, 2012 Share Posted October 11, 2012 Lots of tube bumpers! That's all I can think of. Who Makes tube bumpers???? Link to comment Share on other sites More sharing options...
sube101 Posted October 12, 2012 Author Share Posted October 12, 2012 I've made a few tube bumpers. And I can't drill hubs yet pooparu Link to comment Share on other sites More sharing options...
Pooparu Posted October 12, 2012 Share Posted October 12, 2012 Booooo Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now