Idasho Posted October 6, 2012 Share Posted October 6, 2012 Hey guys, wondering if you could help me out. Im replacing all of the coolant/heater lines on my EA81, and Im stuck wondering what this thing is... And if I can run without it. Thanks for any help. Link to comment Share on other sites More sharing options...
naru Posted October 6, 2012 Share Posted October 6, 2012 It is a seperate thermostat for the intake. I`d leave it on. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted October 6, 2012 Share Posted October 6, 2012 Pitch it. You don't need it. I remove them from all my Weber swaps in addition to blocking the coolant port under the carb. Pull the nipple from the manifold, drill and tap the hole for a set screw. GD Link to comment Share on other sites More sharing options...
Idasho Posted October 6, 2012 Author Share Posted October 6, 2012 damn... too late. I kept it, just bolted the intake mani back down. All new hoses and clamps though. If it fails, If it even fails, Ill pitch it. Thanks Link to comment Share on other sites More sharing options...
aba4430 Posted October 7, 2012 Share Posted October 7, 2012 It is part number 417207010, and is @$21. Still available. http://www.worldpartsexpress.com/parts/1987/Subaru/BRAT/index.cfm?searchText=417207010&siteid=214078&year=1987&make=SUBARU&model=BRAT&submodel=&vehicleid=1267769 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now