torxxx Posted October 8, 2012 Share Posted October 8, 2012 So I put some scratches in my oil pan friday night, decided to take an old EA82 skidplate and refab it to work on an EJ car. Cost = nothing everything was scavenged out of the garbage Measurements = I eyeballed the skid plate, marked it with a paint marker, split the plate in half. The two mounting holes on the rear of the skidplate need to be wobbled out some (EJ mounting position is a 1/2" wider than the EA82 holes. The front is just a piece of 2x2 angle and then a 3/4" piece of angle. Buddy welded it up. Link to comment Share on other sites More sharing options...
Subafreak Posted October 8, 2012 Share Posted October 8, 2012 Craftiness at it's finest. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now