the sucker king Posted November 12, 2012 Share Posted November 12, 2012 So before I put these back in, what is a good way to really clean and flush these as good as possible? Link to comment Share on other sites More sharing options...
djellum Posted November 12, 2012 Share Posted November 12, 2012 air is a popular choice. Id only blow air through the line though, take off the brass block so nothing gets blown into it. Link to comment Share on other sites More sharing options...
torxxx Posted November 12, 2012 Share Posted November 12, 2012 non chlorinated break clean and then follow it up by air Link to comment Share on other sites More sharing options...
ShawnW Posted November 12, 2012 Share Posted November 12, 2012 Are you going to add the hill holder system while you are doing it? Link to comment Share on other sites More sharing options...
the sucker king Posted November 12, 2012 Author Share Posted November 12, 2012 nope Link to comment Share on other sites More sharing options...
bonvo Posted November 12, 2012 Share Posted November 12, 2012 ac system blow out and compressed air you should be able to get the blow out stuff at a shop Link to comment Share on other sites More sharing options...
WoodsWagon Posted November 13, 2012 Share Posted November 13, 2012 Alcohol is the only approved brake system cleaner. "Brake clean" is a degreaser for drums and rotors, and not meant to be inside the braking system. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now