CNY_Dave Posted November 30, 2012 Share Posted November 30, 2012 I can't be the only one that loves this mod- it's already come in handy. Link to comment Share on other sites More sharing options...
Legacy777 Posted December 3, 2012 Share Posted December 3, 2012 Do you have a link to a write-up or post on how to do this that you can share for others? Link to comment Share on other sites More sharing options...
CNY_Dave Posted December 3, 2012 Author Share Posted December 3, 2012 The orig info was here http://offroadingsubarus.com/spraythenwipe.html but that is for a right-drive vehicle, I was able to use the photo there to figure out what to do on my US spec wiper switch. Remove the wiper switch from the steering column, and then remove the plastic cover over the circuit board (snaps on with 2 clips) Cut the track that leaves the upper-right corner of the resistor that says "183" then goes under the one that says "133", you could also remove the resistor, but cutting the track is easier, I think. The longer version where this gets figured out- http://www.ultimatesubaru.org/forum/showthread.php?t=136867 Link to comment Share on other sites More sharing options...
Legacy777 Posted December 9, 2012 Share Posted December 9, 2012 Ok, thanks for sharing. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now