grindolf Posted December 3, 2012 Share Posted December 3, 2012 back of my 86 brat behind the bumper is totally rusted out,. was wondering if i could buy the whole panel whatever it is called, and just weld it in place. it has some contours that would be difficult to duplicate with a piece of sheet metal. plus two recessed areas for access plates where the bumper mounts go through. this seems like it would be hard to fabricate on my own. just wanted to see if there is a full panel that i could buy and use before i start trying to patch it up. thanks. Link to comment Share on other sites More sharing options...
bratman2 Posted December 4, 2012 Share Posted December 4, 2012 When I had my Brat repainted 11 years ago I had the same problem. They cut it out and fitted sheetmetal back. It is still intact to this day. So it is doable with sheet metal. Link to comment Share on other sites More sharing options...
turbosubarubrat Posted December 4, 2012 Share Posted December 4, 2012 this might help http://www.subarupartsamerica.com/parts/1985/SUBARU/BRAT/GL/?siteid=216122&vehicleid=1267747&diagram=756180 Link to comment Share on other sites More sharing options...
bratman2 Posted December 4, 2012 Share Posted December 4, 2012 Everything they are showing is discontinued except for #3. Believe you want #6 but it is highly unlikely you will ever find one new. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now