Ryan1003 Posted April 8, 2004 Share Posted April 8, 2004 Ok... I cant find anything... but does anyone know if ANY other motor(except xt6) will swap into a 87 xt turbo?? I really hate that motor and i need to have a torquey swap for rallycross... Any Ideas?? Link to comment Share on other sites More sharing options...
carfreak85 Posted April 8, 2004 Share Posted April 8, 2004 Sell your XT turbo and buy an XT6. Much, much, much easier than a swap. Link to comment Share on other sites More sharing options...
RedLance Posted April 9, 2004 Share Posted April 9, 2004 Is your 87 Turbo, the 87.5 model? Does it have foglights or places for foglights in the chin spoiler? If it does, then the XT6 engine should swap in no problem, as the 87.5 model, was the same car as the XT6...just with the 4 cylinder. I know, I've got one. Unless you mean you hate the XT6 engine...in which case, I don't see why an EJ22 wouldn't swap in...Other people have done it to EA-82 cars...which is really all the XT is... RedLance Link to comment Share on other sites More sharing options...
XSNRG Posted April 9, 2004 Share Posted April 9, 2004 Yep, pre 87.5 and you have to cut the lower portion of the front cross peice out to fit the six in... Link to comment Share on other sites More sharing options...
subarubrat Posted April 9, 2004 Share Posted April 9, 2004 The EG33 will fit along with a single or twin turbo setup. It is not an easy fit compared to some. I would say it is about half again as hard as getting the ER27 into the BRAT. If you are contemplating this email me and I will assist you as best I can. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now