subGSR Posted January 5, 2013 Share Posted January 5, 2013 Is there an easy way to replace frost plugs. Need to do two in 75DL1400 and &72GSR. Do I need to take the engine out. I have undone the mounts and lifted the motor but not enough room to tap plugs in. Ideas and suggestions thanks. Link to comment Share on other sites More sharing options...
NorthWet Posted January 5, 2013 Share Posted January 5, 2013 I have done the ones in the valve area of an EA81 while it was still in the car. A little annoying, but doable. But, then, the EA81 has a little more room between its rails. Not really that big of a deal to pull the engine all the way out, or even just forward enough to tilt each side for access. Link to comment Share on other sites More sharing options...
kiwi subbie Posted January 6, 2013 Share Posted January 6, 2013 If I see a mate of my dads, I will ask him. He worked on Subaru 1400s when new I think in Invers. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now