97ws6 Posted January 6, 2013 Share Posted January 6, 2013 I have a 2000 Outback with the EJ251 single cams. Are the cam seals installed close to flush with the face of the housing like the crank seal and RMS or deeper into the housing? Thank you. :cool: Link to comment Share on other sites More sharing options...
GeneralDisorder Posted January 6, 2013 Share Posted January 6, 2013 Full depth. Factory cam seals on a '00 will be Viton (brown) and should never require replacement. Leave them be. GD Link to comment Share on other sites More sharing options...
97ws6 Posted January 6, 2013 Author Share Posted January 6, 2013 Thanks GD that was quick. Link to comment Share on other sites More sharing options...
ivans imports Posted January 6, 2013 Share Posted January 6, 2013 i glue them in when i assemble the two head halfs i make shure they are in the same place they were before. I like to glue them as have seen many leaks from the uper head plate were it joins the head by the seal. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now