Jibs Posted April 12, 2004 Share Posted April 12, 2004 What kind of screws connect the seats in the back of the brat? What kind of tool do I need to connect these screws. Thanks a lot. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted April 12, 2004 Share Posted April 12, 2004 Not sure exactly what your asking - the seats are secured to the metal bracket with normal bolts. The bracket is welded into the bed - to remove it, you will have to grind it out. GD Link to comment Share on other sites More sharing options...
Jibs Posted April 12, 2004 Author Share Posted April 12, 2004 There are some sort of special bolt that connects the seats to the frame. It looks like an inverted hex head. I asked a friend and he said that subaru made them special in order to stop people from stealing them from cars. Link to comment Share on other sites More sharing options...
RedLance Posted April 12, 2004 Share Posted April 12, 2004 Could have been some sort of option or only used on later BRAT's My 80 has plain old ordinary bolts holding the seats to the frame. I've had them in and out a couple of different times. Or, maybe a previous owner replaced the original bolts with tamper resistant ones? Do they maybe just need a big allen wrench? Dunno for sure. RedLance Link to comment Share on other sites More sharing options...
Qman Posted April 12, 2004 Share Posted April 12, 2004 The original bolts were a special inverted hex with a dot in the middle. You should be able to get the tool at any tool house or by buying a cheap set of bits at any tool house also. My '85 has the same bolts holding the seats in. Link to comment Share on other sites More sharing options...
ShawnW Posted April 12, 2004 Share Posted April 12, 2004 Tamperproof Torx is what they call them. Like said above a hardware store will have a small 5-8 bit set for cheap. Link to comment Share on other sites More sharing options...
AKIRA Posted April 12, 2004 Share Posted April 12, 2004 mine has normal bolts Link to comment Share on other sites More sharing options...
Qman Posted April 12, 2004 Share Posted April 12, 2004 Most do have normal bolts by now. Mine are the first I've seen and Jibs are the second I've heard of. Link to comment Share on other sites More sharing options...
gbianchi Posted April 13, 2004 Share Posted April 13, 2004 I,ve got the weird ones on an 80 brat Link to comment Share on other sites More sharing options...
BobBrumby Posted April 13, 2004 Share Posted April 13, 2004 It looks like an inverted hex head. You mean an allen key? Link to comment Share on other sites More sharing options...
Jibs Posted April 13, 2004 Author Share Posted April 13, 2004 No its not an allen key. Its kinda like that, but special. Its like an inset allen wrench kinda with teeth things on them. Link to comment Share on other sites More sharing options...
AKIRA Posted April 13, 2004 Share Posted April 13, 2004 When I run into things like that I just use a dremel tool to grind a flat-head slot into it. works all the time on those little star and square screws:cool: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now