Bratworst82 Posted January 20, 2013 Share Posted January 20, 2013 Not sure if this is where to post this question but... Anyone have advice or instructions on removing the trim from around the windshield and above the doors? My dream of restoring the 82 Brat I picked up were crushed when I discovered the bed, wheel wells and "frame rail" were rusted out so I'm starting to part it out. Any and all advice is greatly appreciated. :-\ Link to comment Share on other sites More sharing options...
SuperBrat Posted January 20, 2013 Share Posted January 20, 2013 I just removed the molding for a member here last week in 22 degree weather, they made it with a small screwdriver and about 15 minutes of patiance, now thats for the Pacific Northwest, they might just be brittle and break in other areas of US Link to comment Share on other sites More sharing options...
Bratworst82 Posted January 21, 2013 Author Share Posted January 21, 2013 So how did you go about getting them off? How did you pry? From the top or bottom? Was that just the trim above the doors or for the windshield trim as well? Link to comment Share on other sites More sharing options...
SuperBrat Posted January 21, 2013 Share Posted January 21, 2013 I put screwdriver on topside of the grove the molding sits in and pulled up as i pried, and i have not taken on the chrome above the doors before Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now