subieman666 Posted January 26, 2013 Share Posted January 26, 2013 i cant find any shifter linkage bushing for my loyale. i have looked online and have not come up with anything. would it even be possible to put in a newer shifter and linkage in to my loyale? been searching to see if anyone has on usmb cant find nothing Link to comment Share on other sites More sharing options...
NorthWet Posted January 26, 2013 Share Posted January 26, 2013 After a couple minutes searching (not P/Ns. but some useful info): http://www.ultimatesubaru.org/forum/showthread.php?t=127947 And its pointing to a possible DIY fix: http://www.ultimatesubaru.org/forum/showthread.php?t=127177 Link to comment Share on other sites More sharing options...
TomRhere Posted January 26, 2013 Share Posted January 26, 2013 Fairly sure someone on here did a DIY shifter bushing fix for the EA82 5-speed trans using hardware store parts. Didn't see it in the USRM, but it should've been there. Was pretty good fix. Been roughly 1-1/2 to 2 years, I think Link to comment Share on other sites More sharing options...
ivantruckman Posted January 26, 2013 Share Posted January 26, 2013 (edited) Fairly sure someone on here did a DIY shifter bushing fix for the EA82 5-speed trans using hardware store parts. Didn't see it in the USRM, but it should've been there. Was pretty good fix. Been roughly 1-1/2 to 2 years, I think I was able to find some plastic bushings close to the same od as the shifter, I had to buy a metric drill bit to ream out the id just a little .. 1/2 inch od was very close , needed to sand it just a little and a 3/8 drill is is real close to the id . then I used a hacksaw to cut the bushing to 1 and 1/4 inch in length. Edited January 26, 2013 by ivantruckman spelling Link to comment Share on other sites More sharing options...
ivantruckman Posted January 26, 2013 Share Posted January 26, 2013 http://www.ultimatesubaru.org/forum/showthread.php?t=127177&highlight=shifter+bushing i think this is the thread tom was thinking of Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now