rpholz Posted April 1, 2013 Author Share Posted April 1, 2013 oh look....... rust.... yay... whatevs... fixed the rust up top behind the tail light and stuffs... so to ensure my work doesnt go to sh!t i need to find a new hatch soooooon Link to comment Share on other sites More sharing options...
rpholz Posted April 3, 2013 Author Share Posted April 3, 2013 Boring update: Pulled the brake lines and master cylinder of a auto loyale. I now have brakes. And I may have accidentally lit the body kit on fire..... Link to comment Share on other sites More sharing options...
zukiru Posted April 6, 2013 Share Posted April 6, 2013 I'm confused. What car are you hunting down ej25 heads for. For some reason i thought you had decided to ej this one. Do you have a spare stock turbo? Link to comment Share on other sites More sharing options...
rpholz Posted April 6, 2013 Author Share Posted April 6, 2013 I'm weighing my options, And negative, just td04s Link to comment Share on other sites More sharing options...
rpholz Posted April 7, 2013 Author Share Posted April 7, 2013 downpipe is done and bolted in, o2 is in intercooler is bolted in for the final time ground straps added wire for water temp sender run as well IC water pump+ reservoir in place/bolted down Link to comment Share on other sites More sharing options...
rpholz Posted April 8, 2013 Author Share Posted April 8, 2013 Exhaust is totally done and bolted in Oil catch can is done and in IC to heat exchanger lines are in Grill put back on Air filter bracket fabed up Link to comment Share on other sites More sharing options...
rpholz Posted April 8, 2013 Author Share Posted April 8, 2013 Link to comment Share on other sites More sharing options...
rpholz Posted April 13, 2013 Author Share Posted April 13, 2013 Really hoping to fire this thing up on Sunday, so expect late night updates and poor overly tired grammar, is my work shift over yet??!! 1 Link to comment Share on other sites More sharing options...
tizzle Posted April 13, 2013 Share Posted April 13, 2013 (edited) I also am going to need a new hatch soon. My trunk is nothing like that though. Check out this auto wrecking database for your lid. Prices are surprisingly low, so shipping to FL might not be out of the question. Listed as "lid" http://car-part.com/ Edited April 13, 2013 by tizzle Link to comment Share on other sites More sharing options...
rpholz Posted April 13, 2013 Author Share Posted April 13, 2013 Huh, appreciate the heads up, looks like everything is a minimum of 400miles away, no surprise. They do list a white no spoiler/wiper for 150. Hmmmmm Link to comment Share on other sites More sharing options...
rpholz Posted April 13, 2013 Author Share Posted April 13, 2013 (edited) double post Edited April 14, 2013 by rpholz Link to comment Share on other sites More sharing options...
tizzle Posted April 13, 2013 Share Posted April 13, 2013 I assume the lids are shaped exactly the same so the spoiler should transfer over after drilling a couple holes Link to comment Share on other sites More sharing options...
rpholz Posted April 14, 2013 Author Share Posted April 14, 2013 Yea, they are. no differences between 3dr or RX. it would be easier to make a mold for carbon fiber hatch without everything attached. ACC belts in. water pump for IC is wired. Thermoswitch in the rad is in. Fan is in. vacuum from intake to ecu is ran. Wireing is done, well except a 6" lead to a switch, put in a battery, all guages and what have you light up and are ready to go. tomorrow will be throw the halltech in, load my base map, check the tank, add fuel and turn key. dont expect to drive it tomorrow as i have 1 oddball tire on it and the shifter linkage is partially disassembled. Link to comment Share on other sites More sharing options...
zukiru Posted April 14, 2013 Share Posted April 14, 2013 Nice! Link to comment Share on other sites More sharing options...
rpholz Posted April 14, 2013 Author Share Posted April 14, 2013 RAAAIIIINNNNNNNN????!!!!!! FARK! 1 Link to comment Share on other sites More sharing options...
rpholz Posted April 15, 2013 Author Share Posted April 15, 2013 GAAAHHHH! i can't get the coil to fire! Link to comment Share on other sites More sharing options...
rpholz Posted April 15, 2013 Author Share Posted April 15, 2013 ok, correction when you first turn the motor over you get one strong spark, then nothing. any ideas? Link to comment Share on other sites More sharing options...
crazyman03 Posted April 15, 2013 Share Posted April 15, 2013 how is the power to the coil? -Justin Link to comment Share on other sites More sharing options...
idosubaru Posted April 15, 2013 Share Posted April 15, 2013 igniter?distributor (swap in another one if you have it), it houses the crank angle sensor which i think the ECU requires to trigger spark? i've only seen two "go bad" and in both cases it happened on a motor that sat...coincidence or something inside gets corroded.... Link to comment Share on other sites More sharing options...
rpholz Posted April 15, 2013 Author Share Posted April 15, 2013 Justin, I get 12v to the coil. I need to further test the igniter. Gary, the CAS is working as when I crank it over the haltech reads the rpms. Also I'm afraid I don't have another disty to quickly swap. Link to comment Share on other sites More sharing options...
idosubaru Posted April 15, 2013 Share Posted April 15, 2013 Justin, I get 12v to the coil. I need to further test the igniter. Gary, the CAS is working as when I crank it over the haltech reads the rpms. Also I'm afraid I don't have another disty to quickly swap. Both times I had this happen - the distributors seemed to be working...I just found one post from one of those incidents and I see that I mention I did have spark and everything "seemed" to be working properly - both of those times the car started when i installed another distributor. I would have never tried it in this case posted below had i not seen it happen once before. not likely to be your issue but if you keep hitting dead ends on more likely areas might be worth a shot to clean your existing one out or find another to test. http://www.ultimatesubaru.org/forum/topic/119886-xt6-turns-over-does-not-start-or-try/?hl=%2Bdistributor+%2Bstart Link to comment Share on other sites More sharing options...
zukiru Posted April 16, 2013 Share Posted April 16, 2013 I also had a bad distributor that seemed to fire but it was making weak spark.... That was an 86 disty but still. Sorry you didn't crank it. Link to comment Share on other sites More sharing options...
rpholz Posted April 16, 2013 Author Share Posted April 16, 2013 ok so here is the update. CAS in the disty has been replaced Igniter replaced Pulled the disty and confirmed which wire is which. When you first turn the engine over you get 1v at the igniter causing a spark, it then immediately drops to .1v and stays there. Not sure where to look on this one Link to comment Share on other sites More sharing options...
rpholz Posted April 17, 2013 Author Share Posted April 17, 2013 Sent the map to haltech, they made a few suggestions, ill try it again in a few days, other than that I'm still at a total loss. 1 Link to comment Share on other sites More sharing options...
rpholz Posted April 19, 2013 Author Share Posted April 19, 2013 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Got a call from Scott at Haltech (from Australia) we didn't get it running but he showed me what I was doing wrong and did get it to spark consistently. which meaaaaaans. tomorrow after work this this is absolutely going to run!!! now to go home and count trigger wheel teeth Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now