rpholz Posted July 11, 2013 Author Share Posted July 11, 2013 Rewired the injectors. Found out my map vacuum line location was in a poor spot, having my friend/boss go over the tuning. It's moving along pretty well. Unfurtunetly he is super OCD so my wiring may get pulled apart and redone. So we can put the companies stamp of approval on it. Lol Also I need to locate a stock turbo to fall into class guidelines Link to comment Share on other sites More sharing options...
rpholz Posted July 14, 2013 Author Share Posted July 14, 2013 Replaced the front pads/calipers And got the hatch installed Link to comment Share on other sites More sharing options...
Turbone Posted July 15, 2013 Share Posted July 15, 2013 Looks weird without a wing. Link to comment Share on other sites More sharing options...
rpholz Posted July 15, 2013 Author Share Posted July 15, 2013 I will agree with that Link to comment Share on other sites More sharing options...
rpholz Posted January 25, 2014 Author Share Posted January 25, 2014 (edited) Yada yada yada, car has sat. Somewhat. Decided forget autoX with their stupid rules I'm building an all out what can this ea do RX with much awsome. Getting back to work on it. The manifold is currently being modified to fit a wrx injector with a areomotive style rail with an lines so on and so fourth, I gotta 5 lug the car, pulling a set of carb'd pistons to send to CP to have a forged set made. The celica intercooler got chucked in lue of a jdm legacy A2W with a jaspco pump. The distributor is getting milled to put a dust cap on it and I'm gunna run a ls or subaru coil (like the 22 ones) and I'm stripping the car for a cage and such Partial gutting: Edited January 25, 2014 by rpholz Link to comment Share on other sites More sharing options...
rpholz Posted February 15, 2014 Author Share Posted February 15, 2014 Because fuel 2 Link to comment Share on other sites More sharing options...
subyrally Posted February 19, 2014 Share Posted February 19, 2014 wow, i hadnt seen this car in a long time. on that note, what happened to WJM?? Link to comment Share on other sites More sharing options...
AWD J3wman Posted February 20, 2014 Share Posted February 20, 2014 Just read this whole build thread while I was in my macroeconomics class, this is way more interesting than hyperinflation. I am thinking of TD04ing and camming an EA82T, I want to see what success you have on this. Link to comment Share on other sites More sharing options...
rpholz Posted February 20, 2014 Author Share Posted February 20, 2014 Subyrally- pm sent. AWD j3wman- prepare for a little wait, bouncing between this and my XT. I bought frankenwedge which is a eg33 swapped xt6 with some work that needs to be done to make it a good DD Link to comment Share on other sites More sharing options...
subyrally Posted February 20, 2014 Share Posted February 20, 2014 reading through all of this, i really miss my rx. Link to comment Share on other sites More sharing options...
AWD J3wman Posted February 21, 2014 Share Posted February 21, 2014 Subyrally- pm sent. AWD j3wman- prepare for a little wait, bouncing between this and my XT. I bought frankenwedge which is a eg33 swapped xt6 with some work that needs to be done to make it a good DD well i got a 91 Civic im building also so its still a year or 2 off Link to comment Share on other sites More sharing options...
rpholz Posted March 2, 2014 Author Share Posted March 2, 2014 Went ahead and tapped the fuel rails for -6 AN lines. Cut out the back of the glove box so I can make a panel to hold the haltech and wideband controller. Figured out the IC to TB piping, just gotta cut it and weld a flange for the BOV and IAT sensor. I need modify the dog bone bracket so it all clears better Link to comment Share on other sites More sharing options...
subyrally Posted March 2, 2014 Share Posted March 2, 2014 i like where this is going. 1 Link to comment Share on other sites More sharing options...
rpholz Posted March 8, 2014 Author Share Posted March 8, 2014 Awwww yea. Btw anyone interested in RX bits? 1 Link to comment Share on other sites More sharing options...
rpholz Posted March 8, 2014 Author Share Posted March 8, 2014 Also! I NEED xt6 rear backing plates as the ones I had were rotted out. Link to comment Share on other sites More sharing options...
subyrally Posted March 8, 2014 Share Posted March 8, 2014 i might have a set, let me check my stash. Link to comment Share on other sites More sharing options...
subyrally Posted March 8, 2014 Share Posted March 8, 2014 backing plates found, not much more than some surface rust and a whole mess of spiderwebs and dead stuff *cringes* i hate spiders Link to comment Share on other sites More sharing options...
rpholz Posted March 9, 2014 Author Share Posted March 9, 2014 Oh how much?! That would be a life saver! Hopefully without spiders...... Right? Also! My initial suspension settings are a bit..... Low 1 Link to comment Share on other sites More sharing options...
rpholz Posted March 9, 2014 Author Share Posted March 9, 2014 Oh look, I actually mounted my haltech today. Lol Link to comment Share on other sites More sharing options...
subyrally Posted March 10, 2014 Share Posted March 10, 2014 the spiders are extra...... if i have to keep em. lol 2 Link to comment Share on other sites More sharing options...
rpholz Posted March 11, 2014 Author Share Posted March 11, 2014 Harness revision V1.1 I still need to run power for the injectors but all the important bits are there Also, I think I might start hunting these down....... 1 Link to comment Share on other sites More sharing options...
rpholz Posted March 12, 2014 Author Share Posted March 12, 2014 Stock tire vs what's going on the RX. 1 Link to comment Share on other sites More sharing options...
nsm484 Posted March 13, 2014 Share Posted March 13, 2014 Dat Grip...... 1 Link to comment Share on other sites More sharing options...
subyrally Posted March 14, 2014 Share Posted March 14, 2014 dont think i have forgotten about you and the backing plates, i have been busy this week, but i am going to try to get you a shipping quote this weekend. i will let you know what i find out. Link to comment Share on other sites More sharing options...
rpholz Posted March 19, 2014 Author Share Posted March 19, 2014 Started porting out the intake for the larger throttle body 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now