crazyman03 Posted April 7, 2013 Author Share Posted April 7, 2013 (edited) Oh, and as far as the BOV, I had hoped to find a turbo block to drop in there but nothing so far :-/ though, a Back-side turbo did tickle my fancy.. -Justin Edited April 7, 2013 by crazyman03 Link to comment Share on other sites More sharing options...
crazyman03 Posted April 11, 2013 Author Share Posted April 11, 2013 Hrm.. what do we have here? -Justin Link to comment Share on other sites More sharing options...
crazyman03 Posted April 13, 2013 Author Share Posted April 13, 2013 (edited) work in progress... -Justin Edited April 13, 2013 by crazyman03 Link to comment Share on other sites More sharing options...
crazyman03 Posted April 14, 2013 Author Share Posted April 14, 2013 (edited) Ok, a bit more time to post now. Here's kinda how it went in order.. quick mockup on the ground Up on the car, right before tacking the welds and finishing it up, no, the bundgee coard is NOT sticking around, i did install a hanger - top left where the OE one would be ;-) after it all: -Justin Edited April 4, 2014 by crazyman03 Link to comment Share on other sites More sharing options...
crazyman03 Posted April 14, 2013 Author Share Posted April 14, 2013 I dont know what i think of the tail-end. I never did like being able to see a muffler. thoughts? It is very quiet in the cab now.. a much nicer rumble with the 2.5" pipe -Justin Link to comment Share on other sites More sharing options...
rpholz Posted April 14, 2013 Share Posted April 14, 2013 muffler needs to be up higher, out of sight, looks good tho Link to comment Share on other sites More sharing options...
92_rugby_subie Posted April 14, 2013 Share Posted April 14, 2013 +1 Agreed, mines kinda tucked up... I love starting it and watching people "casually" walking by it and looking under the car haha... Link to comment Share on other sites More sharing options...
crazyman03 Posted April 14, 2013 Author Share Posted April 14, 2013 I was trying for a bit tucked up but somewhere between the tack welds and pulling it down to finish it kinda shifted. That, and it already kinda sat funky up there. the angle going under the axles was kinda weird and would've rubbed. I might pull it back down and attempt to bend the angle a bit and see where that gets me. I also dont like the stupid angle that most 'roo's (and stupid hondas) do with it all cocked upword. Granted, i dont have a fart can.. but still not fond of being able to see the muffler. -Justin Link to comment Share on other sites More sharing options...
rpholz Posted April 14, 2013 Share Posted April 14, 2013 yea, it will shift. when i did the exhaust on the RX, i had everything super tight, pulled it down and welded it, now i have plenty of clearance everywhere EXCEPT the rear hanger, which it now smacks so i have to jump under there and cut it. i'm definatly a fan of things being tucked up. Link to comment Share on other sites More sharing options...
crazyman03 Posted April 15, 2013 Author Share Posted April 15, 2013 (edited) dang! wish my welds looked that good! haha! I imagine my technique would be better if i welded more - Meh :-/ Anyway, got back under there to patch up a few leaks that i saw earlier. Some condensation was leaking through the welds. I also got the muffler to go up a bit higher and painted the exhaust black - maybe it would bug me less if i didnt see it so easy. I think i like it more.. vid before i did the work today. JusZek asked for it -Justin Edited April 4, 2014 by crazyman03 1 Link to comment Share on other sites More sharing options...
crazyman03 Posted April 15, 2013 Author Share Posted April 15, 2013 (edited) -Justin Edited April 4, 2014 by crazyman03 1 Link to comment Share on other sites More sharing options...
ryot1 Posted April 18, 2013 Share Posted April 18, 2013 you have the same car as me i love it heres how mine sits 1 Link to comment Share on other sites More sharing options...
crazyman03 Posted April 25, 2013 Author Share Posted April 25, 2013 New dash lights! -Justin Link to comment Share on other sites More sharing options...
rpholz Posted April 26, 2013 Share Posted April 26, 2013 I did the same thing in the DL, waaaaay too bright at night Link to comment Share on other sites More sharing options...
crazyman03 Posted April 26, 2013 Author Share Posted April 26, 2013 yea. Actually. I just went out and looked. HOLY CRAP! -Justin Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted April 26, 2013 Share Posted April 26, 2013 (edited) Thank you for the Video! ....vid before i did the work today. JesZek asked for it -Justin I Really Like your Nice Impreza Wagon and all the Mods You've done! About the extremly brilliant Dashboard after Led Swap, Have you Used the Dimmer Knob ... ... ? Kind Regards. Edited April 27, 2013 by Loyale 2.7 Turbo Link to comment Share on other sites More sharing options...
crazyman03 Posted April 26, 2013 Author Share Posted April 26, 2013 lol I did.. it didnt change it much. -Justin Link to comment Share on other sites More sharing options...
rpholz Posted April 26, 2013 Share Posted April 26, 2013 Resistors young patawon Link to comment Share on other sites More sharing options...
crazyman03 Posted April 26, 2013 Author Share Posted April 26, 2013 *giggle* i know. though, before I realized it was so bright, i had thought about maybe tinting the plastic going for that "new-age" dark look. here's how it turned out looking like -Justin Link to comment Share on other sites More sharing options...
rpholz Posted April 27, 2013 Share Posted April 27, 2013 Ohhhhhh my god that's bright Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted April 29, 2013 Share Posted April 29, 2013 Resistors young patawon Yep... If you installed LED Bulbs instead the incandescent T-10 and T-5 Behind the instrument cluster, you'll need to install a single Resistor Behind the the Power Input (12V +) just before it accesses the Dimmer Knob. Kind Regards. Link to comment Share on other sites More sharing options...
crazyman03 Posted May 4, 2013 Author Share Posted May 4, 2013 a bit of an update.. i got bored and brought the front up 2.5ish inches to kinda level it out with the back.. -Justin Link to comment Share on other sites More sharing options...
crazyman03 Posted May 4, 2013 Author Share Posted May 4, 2013 (edited) I'm thinking i'm sitting a bit higher on the front :-/ Thinking in need to bring the back up too *teeeheeehee* (the axles arent really angled much on the rears). The rear tophats on the OBW struts i have dont come off for some reason. I was trying to put the tophats that had my "lift" done, i couldnt get the OBW tophats off.. and i threw away the spring tops from my old Impy struts :-/ -Justin Edited May 4, 2013 by crazyman03 Link to comment Share on other sites More sharing options...
crazyman03 Posted May 8, 2013 Author Share Posted May 8, 2013 Well.. i unplugged the LEDs on the dash for now. I am thinking about tinting the plastic and seeing where that gets me.. i don't want it too dark but id like the whole "new age" look ;-) anyway, an update.. i got a new amp! well, CB linear amp lol!! -Justin 1 Link to comment Share on other sites More sharing options...
crazyman03 Posted May 19, 2013 Author Share Posted May 19, 2013 200k! that is all.. ;-) -Justin 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now