used car Posted February 14, 2013 Share Posted February 14, 2013 Subaru gl 1.8l has a grinding sound from front wheel area when accerating from a stop. Quites when i let let off the gas or turn steering wheel left.What is that?Need help! Link to comment Share on other sites More sharing options...
NorthWet Posted February 14, 2013 Share Posted February 14, 2013 Any recent work around the hub? Wheel bearing or axle work? Link to comment Share on other sites More sharing options...
used car Posted February 14, 2013 Author Share Posted February 14, 2013 Yes had a wheel bearing replaced.Started hearing that sound after a couple of days Link to comment Share on other sites More sharing options...
ystrdyisgone Posted February 14, 2013 Share Posted February 14, 2013 My guess would be the other wheel bearing. This guess would be even more substantiated if it was your right bearing that was replaced. Link to comment Share on other sites More sharing options...
MilesFox Posted February 14, 2013 Share Posted February 14, 2013 (edited) loose hub or axle nut maybe. check the washers on the axle nut that they are installed properly. check if the nut is loose. please search for axle nut as the washer has to go on one way to hold torque. IT may be on backwards with the recent service and hence causing problems a few days later. Edited February 14, 2013 by MilesFox Link to comment Share on other sites More sharing options...
used car Posted February 14, 2013 Author Share Posted February 14, 2013 Yes it was the right front bearing that was replaced .Why then is it making noise again? Link to comment Share on other sites More sharing options...
NorthWet Posted February 14, 2013 Share Posted February 14, 2013 loose hub or axle nut maybe. check the washers on the axle nut that they are installed properly. check if the nut is loose. please search for axle nut as the washer has to go on one way to hold torque. IT may be on backwards with the recent service and hence causing problems a few days later. +1. Even if the dished washer is on correctly, the axle does not always (usually...) seat all the way after reinstalling and torquing the nut. This causes axle movement within the hub, which can sound like grinding. Check the dished washer, then retorque the nut. Link to comment Share on other sites More sharing options...
ystrdyisgone Posted February 14, 2013 Share Posted February 14, 2013 Definitely check into what Miles and NorthWet were talking about, if that doesn't help then inspect the left bearing. When you turn to the left, the weight of the car falls mostly onto the right bearing. If the left bearing is now the culprit this follows with the symptoms, as driving straight has more load on the bearing, then when steering to the left. Link to comment Share on other sites More sharing options...
88wacaroo Posted February 15, 2013 Share Posted February 15, 2013 YEP, Gotta go with ISGONE on this....usually when one side goes bad the other follows next short after! I just finished doing my car ea-81 2 wks. ago-the bearings got so bad you could"nt hear the radio anymore{EX-GF Drives this car}-She started complaining about not being able to hear the stereo anymore so I had to look at it {I just change the oil,she drives} I drove it 2 blks. WOW-DEAFNING!!! I asked her how long it had been like this an she tells me 6-8months an it got to where the radio did"nt drown it out anymore It took me 2HRS. w/my 3/4"air hammer to get the damn axles out-I"m thankful 4 ear plugs Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now