Spacecadetchickn Posted February 19, 2013 Share Posted February 19, 2013 Hello all. Been looking on the site for years but now I have a question so I signed up lol. First, I had a 1994 legacy lsi 4wd 2.2 at...and swapped in a (donor)99 ouback drivetrain 2.5d/at ( motor tranny diff axles hubs struts tires etc and yes it's lifted) I also did the dash swap with the whole ob harness(body dash gas tank engine bay).... It's sitting on the ground now and all I have left to do is the wire the pwr lock/ windows and figure out the fuel...which is my issue... Harness is all plugged in... I used the ob fuel pump in the 94 legacy tank) so, I have no cel, no fuel going to the motor and I'm not sure why. Also noteworthy, I did not use the evap box behind the pass side rear wheel( was smashed in the wreck. Please help... I'm stumped on the 2 month endeavor Link to comment Share on other sites More sharing options...
Spacecadetchickn Posted February 20, 2013 Author Share Posted February 20, 2013 Oops my dislexia kicked on my button pushing.. Sorry .. Moderators please move:) Link to comment Share on other sites More sharing options...
apintonut Posted January 21, 2014 Share Posted January 21, 2014 What u doing with the old drive-train Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now