tnrknght Posted March 1, 2013 Share Posted March 1, 2013 Im currently looking into a 98 forester 5spd, 2.5l and Im new to the platform. I have no idea what interchanges or what I can look for. I recall with my legacy wagon I could use the front strut tower bar from a 90s impreza and the rear bar from a 02+ impreza. However with the forester I dont know what matches. I intend to have the car lowered, Id like to keep the suspension on par with the engine work itll be getting, I have a pair of new heads going into it and a friend with an 05 STi has the stock headers, up and downpipe from before his stage 4 ecs setup, so Ill be making the investment to boost the car with its rebuild. Yes Im aware it take more than a few pipes, just saying its nice to have the donation to my cause So yea, long story short, Id like to know what I can search thatll match. Suspension, exhaust, etc? Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted March 1, 2013 Share Posted March 1, 2013 I have some stock 06 WRX wagon springs. Dunno if/how they might work on your Forry. less than 1900 miles on them. Link to comment Share on other sites More sharing options...
Rooster2 Posted March 1, 2013 Share Posted March 1, 2013 For what it is worth, the front knuckle assembly housing the wheel bearings is the same on 99 OBW and 99 Forester. I know this, as my OBW is using a knuckle from a Forester. Perfect interchange. Link to comment Share on other sites More sharing options...
tnrknght Posted March 2, 2013 Author Share Posted March 2, 2013 Ill have to look into the wrx springs, I remember the legacy and forester matched suspension-wise, my brother commented he should have sourced a factory forester suspension to lift his legacy. Between his lifted and mine sitting low, there was a good 4-5" difference, same year leggy wagons So yea the springs might be doable, if I remember correctly he only would have needed to swap out the tophats. Link to comment Share on other sites More sharing options...
Fairtax4me Posted March 2, 2013 Share Posted March 2, 2013 Forester platform is based on the Impreza. Pretty much All of the chassis/suspension parts swap over with no modification needed. Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted March 2, 2013 Share Posted March 2, 2013 I can take pics and measurements if it seems like it's a possible fit. I just know nothing about what swaps so, you'd want to confirm fitment first. They've been in my attic for years and if I could get -say - $75 bucks or so, shipped to the lower 48, I'd be good with that. Link to comment Share on other sites More sharing options...
wtdash Posted March 4, 2013 Share Posted March 4, 2013 Here is some light reading on boosting your '98 Foz. Also has some suspension info. GL, Td Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted March 4, 2013 Share Posted March 4, 2013 (edited) nvrmd Edited March 4, 2013 by 1 Lucky Texan Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now