mgcwrnch Posted March 15, 2013 Share Posted March 15, 2013 Yes. it is running fine at higer RPM. When dropping down to idle it will hold a few seconds, then the tach needle jumps all over, then quits. Seems to be electronic ?? New fuel filter, cleaned the TPS contacts. Hope for some ideas !! Link to comment Share on other sites More sharing options...
naru Posted March 15, 2013 Share Posted March 15, 2013 Check for side play of the distributor shaft. You want almost none. Common fault. Link to comment Share on other sites More sharing options...
mgcwrnch Posted March 15, 2013 Author Share Posted March 15, 2013 Will do ASAP. Only has 106,+++ miles, should be tight. We'll see. Link to comment Share on other sites More sharing options...
mgcwrnch Posted March 15, 2013 Author Share Posted March 15, 2013 Right about that, 1000 + !! Have .060 to .090 in movement of the shaft. Has a screw down cap, which was replaced with the rotor. NAPA and others cannot find the replacement. Anyone have a part ## or where to get a good rebuilt ?? Or, anyone have a good used one to part with ?? Alan Link to comment Share on other sites More sharing options...
jonas Posted March 16, 2013 Share Posted March 16, 2013 cap or disty? Link to comment Share on other sites More sharing options...
mgcwrnch Posted March 16, 2013 Author Share Posted March 16, 2013 Need the base, has a screw down cap. Shaft needs rebush. Link to comment Share on other sites More sharing options...
jonas Posted March 16, 2013 Share Posted March 16, 2013 www.philbingroup.com I believe these are the guys General Disorder recommended. Look in their rebuilt products section. Link to comment Share on other sites More sharing options...
jonas Posted March 16, 2013 Share Posted March 16, 2013 www.philbingroup.com I believe these are the guys General Disorder recommended. Look in their rebuilt products section. Link to comment Share on other sites More sharing options...
86BRATMAN Posted March 16, 2013 Share Posted March 16, 2013 you can use an 85-86 ea82t distributor with a little modification, has to be those years though. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now