DevoScoobyRoo Posted March 17, 2013 Share Posted March 17, 2013 (edited) I have a 86 Subaru brat. I have three original center caps. I found a full set in better conditionOn a 84 gl hatch.Problem is they don't catch when I try to put them on. Is there a trick to get them to hold. I noticed the clips are a little different. The originals stick out higher then the new ones. But mine don't even stay on all that well.Does anyone have any ideas? the left side is from my brat. the right from a gl hatch http://file:///Users/admin/Downloads/image_1364517789482399.jpg Edited March 29, 2013 by DevoScoobyRoo Link to comment Share on other sites More sharing options...
zukiru Posted March 17, 2013 Share Posted March 17, 2013 (edited) I am running brat caps on my 92 Loyale. The trick is to bend the teeth/hooks a little bit at a time until it attaches snugly. Edited March 17, 2013 by zukiru Link to comment Share on other sites More sharing options...
scoobiedubie Posted March 17, 2013 Share Posted March 17, 2013 For the GL/Loyale series 6 spoke wagon wheels, a plastic ring is required to line the center whole of the wheel, that the caps attach to. Then you may need to rebend the teeth on the cap, in order to get a firm grip on the plastic ring. Link to comment Share on other sites More sharing options...
SuperBrat Posted March 17, 2013 Share Posted March 17, 2013 Yah on the plastic ring, dumb design, but i do have 1 Brand new if you need it.... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now