soobie_newbie67 Posted March 25, 2013 Share Posted March 25, 2013 (edited) I searched but only found talk on it, and no real link or what not to a write up on how to do it. We got the tail end of the trans off, but dont know what to do from there. I was expecting to find a clutch pack in the end. woops. forgot to add. 1996 Legacy Outback Edited March 25, 2013 by soobie_newbie67 Quote Link to comment Share on other sites More sharing options...
CNY_Dave Posted March 25, 2013 Share Posted March 25, 2013 If there was no clutch pack, what was there? This is an automatic? was there a rear driveshaft? Quote Link to comment Share on other sites More sharing options...
soobie_newbie67 Posted March 25, 2013 Author Share Posted March 25, 2013 (edited) yeah. the rear output shaft is there, a gear, and a cylinder and a bearing on the shaft. and yes. its an auto Edited March 25, 2013 by soobie_newbie67 Quote Link to comment Share on other sites More sharing options...
CNY_Dave Posted March 26, 2013 Share Posted March 26, 2013 If the rear output shaft stayed with the trans, just pull it off and you'll see the clutchpack, it stays with the output shaft. Quote Link to comment Share on other sites More sharing options...
soobie_newbie67 Posted March 26, 2013 Author Share Posted March 26, 2013 dangit. we wasted a whole day cause we couldn't figure that out. I tried prying on it a little and when it didn't come right off I freaked out a little. oh. and there is this little spring on a shaft at the bottom that sprung off. how does that go back on? Quote Link to comment Share on other sites More sharing options...
CNY_Dave Posted March 26, 2013 Share Posted March 26, 2013 There are pics on the web of the AWD section, I'm not familiar with the '96. My '03 has a spring that holds back the parking pawl. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.