NewMaineGuide Posted March 28, 2013 Share Posted March 28, 2013 Hello to all, I have a 2003 Baja and would like to give it a slight no too stressful lift. Has anyone here used struts and springs from a later year or from a outback or impreza to lift their vehicle? If so, do I need to replace driveshafts too? Arms? Any help and guidance would be really appreciated. Please no flaming..... Link to comment Share on other sites More sharing options...
bratman18 Posted March 28, 2013 Share Posted March 28, 2013 There was a certain year that the struts were longer on the Baja. But not sure which had them and which didn't. But someone should. Your other option is to add spacers on top of the struts. No need to change anything else unless you want to go quite a bit bigger. Link to comment Share on other sites More sharing options...
spazomatic Posted March 28, 2013 Share Posted March 28, 2013 I may be wrong, but i recall reading here that '03 was the shortest of the bunch. From '04 to '06 they were taller Link to comment Share on other sites More sharing options...
Gloyale Posted March 28, 2013 Share Posted March 28, 2013 Check out Highguyslifts.com We make a 2" kit for your Baja (listed as 1-3/4" lift) the reason is in a strut lift only, you are rotating the arm to a new position. Pushing 1 3/4 on the mount point of the arm, puts the wheel 2" further down. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now