mgcwrnch Posted April 8, 2013 Share Posted April 8, 2013 Fan Clutch seems to be shot. How do the four bolts to the water pump come out ?? No room to get wrench at them. Remove radiator, alternator, take out engine ?? Bruised hands need to know !! Link to comment Share on other sites More sharing options...
mikaleda Posted April 8, 2013 Share Posted April 8, 2013 Removing the rad would probably help a lot, try that first and go from there. Link to comment Share on other sites More sharing options...
91_EJ_22 Posted April 8, 2013 Share Posted April 8, 2013 (edited) yeah we can normaly get it done by pulling the rad and then you can put on two electric fans if you want Edited April 8, 2013 by 91_EJ_22 Link to comment Share on other sites More sharing options...
man on the moon Posted April 8, 2013 Share Posted April 8, 2013 I use a pair of long handled pipe wrench or channel locks to hold the shaft of the fan, and a 10m box end wrench to work the nuts loose. Remove the four at the back of the fan, not the ones buried in the fins the front. A 22m box end will also hold the fan shaft, just make sure to grab the flattened sections and not the rounded parts of the shaft! Link to comment Share on other sites More sharing options...
man on the moon Posted April 8, 2013 Share Posted April 8, 2013 It also helps if you remove the fan shroud. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now